Functions Of The Machine Control Panel - Siemens SINUMERIK 840DiE sl Manual

01/2007
left LED block
Fig. 8-18 MCP software version display
Switch S3
8.7.3

Functions of the machine control panel

© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
In the example (Fig. 8-18) version number: V 01.02.00 is displayed.
1st digit 2nd digit
center LED block
The PROFIBUS address and connection type are set with switch S3 on the rear
of the MCP:
Table 8-4 Switch S3: PROFIBUS address (1 – 7)
10 9 8 7 6 5
on on – – – –
– – off – – –
– – – off off off
– – – off off off
– – – on off off
– – – off off off
– – – : : :
– – – on on on on on on off
– – – on on on on on on on
Switch settings 10 – 8 must be set according to the data in the table.
Notice
In the state as delivered, the connection type is: MPI (10 – 9: off, off).
The machine control panel offers the following functions:
S
Default
S
Hand wheel
S
Additional I/Os
8 PROFIBUS DP Communication
8.7 DP slave: MCP 483
Enable software version display
3rd digit
(press both keys
right LED block
simultaneously)
4 3 2 1
– – – – Connection type: PROFIBUS
– – – – Reserved
PROFIBUS address
off off off off 0
off off off on 1
off off on off 2
off off on on 3
: : : : :
126
127
Meaning/value
8-211