Hmi Advanced (Option) - Siemens SINUMERIK 840DiE sl Manual

15 User Data Backup/Standard Commissioning
15.2 Creating a series commissioning file
15.2.2

HMI Advanced (option)

15-462
The creation of a series startup file with HMI Advanced is divided into the follow-
ing steps:
1. Open the menu to create a series startup file:
Operating area switchover > Services > ETC key ">" > Standard
commissioning > Create commissioning archive
2. Selection of components to be backed up (see figure: archive content)
3. Assignment of a filename (see figure: archive name)
4. Setting of the series startup file via the vertical "Archive" softkey. The series
startup file is stored in the archive directory on the hard disk of the PCU.
Services CHAN1
Channel RESET
Creating a series startup
archive
Archive content
HMI
NC
PLC
PROFIBUS drives
Archive name
MMCNCPLCANTR
Standard
commissioning
Fig. 15-1 Menu: Creating a series startup archive
AUTO MPF0
Program aborted
ROV
with compensation data
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
01/2007
HMI data
selection
Read in
commissioning
archive
Archive