Siemens SINUMERIK 840DiE sl Manual page 449

01/2007
Softkeys:
2nd marker,
zoom,
fullscreen
Softkey:
Scale
Fig. 14-11 Menu: Scaling of graphics
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
If a marker is active, a 2nd line is shown in the diagram via the 2nd marker soft-
key. These two lines define the range that you can then have displayed over the
entire display range by pressing softkey Zoom.
The process of zooming a range (marker ON, 2nd marker, zoom) can be re-
peated as often as desired until the maximum size of representation is reached.
Use the softkey Fullscreen to switch the display of the diagrams back to their
original size.
Note
X and Y markers can be active at a time.
Use the softkey Scale to change the scaling of the traces and of the marker
ranges in the two graphs.
The scaling can be switched over between auto (default setting) and fixed. The
Y range (Y min/max) to be displayed can only be changed in fixed mode.
14 Drive Optimization with HMI Advanced
14.6 Trace function
14-449