Siemens SINUMERIK 840DiE sl Manual page 388

11 NCK Commissioning with HMI Advanced
11.6 Handwheels
11-388
Call parameter of the function module FB1 in organization module OB100:
Parameter Value
MCPNum := 1
MCP1In := P#E0.0
MCP1Out := P#A0.0
MCP1StatSend := P#A8.0
MCP1StatRec := P#A12.0
MCP1BusAdr := 192
MCPBusType := b#16#55
Comment
// MCP available
// Address of the input data
// Address of the output data
// Address of the send status data
// Address of the receive status data
// "Address" set via switch S2
// on the MCP
// Bus type: Ethernet
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
01/2007