Input/Output Image - Siemens SINUMERIK 840DiE sl Manual

01/2007
8.7.6

Input/output image

Arrangement:
Keys and LEDs
S09 S01 S02
S10 S03 S04
S11 S05 S06
S12 S07 S08
S13 S14 S15 S16
Fig. 8-20 MCP 483 keyboard layout (front view)
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
Please refer to the corresponding SIMATIC literature for details of linking orga-
nization blocks and evaluating diagnostic data.
Notice
In the event of the failure of a machine control panel connected via MPI, the
following alarm is triggered by the PLC basic program:
S
Alarm "40026x machine control panel (x+1) failure"; with x = 0, 1
When connecting the machine control panel via PROFIBUS, the user (machine
manufacturer) is responsible for triggering a corresponding alarm.
A key and the LED positioned above it form a logical unit. The key and the LED
have the same number.
S
Key number xy corresponds to Sxy
S
LED number xy corresponds to LEDxy
Fig. 8-20 shows the arrangement of keys and LEDs on the machine control
panel. For the sake of clarity, the LED designations are not shown in full.
S17 S18 S19
S20 S21 S22
S23 S24 S25
S26 S27 S28
S29 S30 S31
8 PROFIBUS DP Communication
8.7 DP slave: MCP 483
LED34
S32 S33 S34
S35 S36 S37
S38 S39 S40
S41 S42 S43
S44 S45 S46 S47
LEDs
Key
S48 S49 S50
8-219