Expansion Cards; Expansion Card I/O-14/08 - Pilz PMCtendo DD5 Operating Manual

Function description
–
}
A database containing motor parameters for Pilz motors makes it easier to set paramet-
ers for the servo amplifier.
If the correct motor-related data has been loaded from the database, the control para-
meters generally only need to be optimised.
4.4

Expansion cards

4.4.1

Expansion card I/O-14/08

The expansion card I/O-14/08 is available as an accessory.
Functions:
}
14 additional digital inputs and 8 digital outputs
}
The function of the inputs and outputs can be configured in the commissioning soft-
ware.
}
The inputs initiate the motion tasks that are stored in the servo amplifier.
}
The outputs signal the status of the integrated position controller to the higher level con-
trol system.
}
The functions of the inputs and outputs correspond to the functions that can be as-
signed to the digital inputs and outputs on connector X3 of the servo amplifier.
} The inputs and outputs are isolated from the servo amplifier through optocouplers.
Fig.: Front view of expansion card I/O-14/08
LEDs:
LED
Green
Red
Operating Manual PMCtendo DD5
1002236-EN-04
Setting of limit values, braking ramps for the safety functions, monitoring of motion
sequences
INFORMATION
Detailed information can be found in the following documents:
- Software manual and online help for the commissioning software.
- PMCprimo programming manual
Both documents are available on the Internet.
Description
24 V supply voltage is present
Fault on the expansion card's outputs (overload and/or short circuit)
58