Expansion Cards; Expansion Card I/O-14/08 - Pilz PMCtendo DD5 Operating Manual

6 Wiring
6.8

Expansion cards

6.8.1

Expansion card I/O-14/08

6- Expansion cards 6800 Expansion cards 6.8
6- ][Verdr_Leiterquerschnitte_Verweis Expansion card I/O-14/08
][Verdr_Erw_I_O_14_8_protego_D
Connector X11A
Connector X11B
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
6-60
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: pilz.gmbh@pilz.de
Under "Connection cables", please note the requirements for the:
Cable cross sections

Insulation material

The assignment of the inputs and outputs in the tables below is the de-
fault setting ("Connector pin assignment" table, under "Designation"). It
can be changed at any time in the commissioning software (see chapter
entitled "Function Description" for details of the expansion card).
Connector pin assignment
Pin Designation
1 A0
2 A1
3 A2
4 A3
5 A4
6 A5
7 A6
8 A7
9 Reference
10 S_fehl_clear
11 FStart_Folge
12 FStart_Tipp x
Pin Designation
1 FRestart
2 FStart_I/O
3 InPosition
4 Folge-InPos / PosReg 0
5 S_fehl
6 PosReg1
7 PosReg2
8 PosReg3
9 PosReg4
10 PosReg5
11 24 VDC
12 I/O-GND
Description
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Digital input
Description
Digital input
Digital input
Digital output
Digital output
Digital output
Digital output
Digital output
Digital output
Digital output
Digital output
Supply voltage 24 VDC
Reference earth