Description; Table Analyser - Promax HD RANGER 2 User Manual

While starting, the TS Analyser takes few seconds to detect and
identify the TS signal, and then the results appear on screen.
An error message pops up if the signal does not contain any TS or if
the TS cannot be found. In this case, check the signal.
The following describes in detail each one of these functions.
7.1.3

Table Analyser

Description:

►
This function displays the TS tables as they are captured. The system shows
the tables in a tree diagram for easy browsing with the joystick. All
components and contents of tables can be consulted by deploying the nodes.
So the user can analyse the tables and see in detail what is being transmitted
and if the information is properly encapsulated. This tool requires detailed
knowledge about the contents of these tables.
Screen Description:
►
Selected installation; date and time.
Selected function.
Selected band; battery level.
Main Table Tree.
Detail TableTree.
Signal status (searching/locked/multiplex name).
Softkey menus.
7-70
Figure 53.
1
June 2014