Resolution Setting; Scaler - Image Position Setting; Color Space Converter Setting; Query The Timing Mode - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
7. Programmers' Reference 7. Programmers' Reference
7.6.8. Resolution Setting
The resolution which are set here will be enforced only in case of the ResolutionMode is set to Forced. See
the details about the Resolution Mode Setting in the previous sections.
Command and Response
SET•/MEDIA/VIDEO/<source|out>.ResolutionSetting=<resolution>
ç
pw•/MEDIA/VIDEO/<source|out>.ResolutionSetting=<resolution>
æ
Example
ç SET /MEDIA/VIDEO/O1.ResolutionSetting=1600x1200p60
æ pw /MEDIA/VIDEO/O1.ResolutionSetting=1600x1200p60

INFO: The entire list of available resolutions can be found in the
7.6.9. Scaler - Image Position Setting
The image position setting which is set here will be enforced only in case of the ResolutionMode is set to
Forced.

ATTENTION! The scaler setting is available for the stream of the HDMI output 1 port only.
Command and Response
SET•/MEDIA/VIDEO/<out>.ImagePosition=<image_position>
ç
pw•/MEDIA/VIDEO/<out>.ImagePosition=<image_position>
æ
Parameters
The <image_position> can be set to Center, Stretch, or Fit.
Example
ç SET /MEDIA/VIDEO/O1.ImagePosition=Stretch
æ pw /MEDIA/VIDEO/O1.ImagePosition=Stretch
#scaler #frc
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Resolutions of the Scaler / FRC section.
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
7.6.10. Color Space Converter Setting
Command and Response #csc #colorspace
SET•/MEDIA/VIDEO/<source|out>.ColorSpaceSetting=<color_space>
ç
pw•/MEDIA/VIDEO/<source|out>.ColorSpaceSetting=<color_space>
æ
Parameters
Identifier Parameter description
<color_space> Color space setting
Example
ç SET /MEDIA/VIDEO/O1.ColorSpaceSetting=YCbCr 4:4:4
æ pw /MEDIA/VIDEO/O1.ColorSpaceSetting=YCbCr 4:4:4
7.6.11. Query the Timing Mode
The query returns with the current status of the timing mode. See more details about it in the
section.

ATTENTION! The timing mode can be changed in the receiver only. See the related LW3 protocol command
in the Timing Mode Setting section.
Command and Response #timingmode #freerun #sourcelocked
ç GET•/MEDIA/VIDEO/<source|out>.TimingMode
pr•/MEDIA/VIDEO/<source|out>.TimingMode=<timing_mode>
æ
Parameters
The <timing_mode> can be Freerun or SourceLocked.
Example
ç GET /MEDIA/VIDEO/S1.TimingMode
æ pr /MEDIA/VIDEO/S1.TimingMode=SourceLocked
Value Explanation
Pass-through mode - the original color
Pass space of the stream is transmitted to the
sink device.
RGB Forced RGB color space.
YCbCr 4:4:4 Forced YCbCr 4:4:4 color space.
YCbCr 4:2:2 Forced YCbCr 4:2:2 color space.
Timing Modes
91 91