Lightware Device Controller (Ldc); Install And Upgrade - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     

6. Lightware Device Controller (LDC)

6. Lightware Device Controller (LDC)
6
L ightware Device Controller (LDC)
The device can be controlled by a computer through Ethernet interface with the
Lightware Device Controller (LDC). The software can be installed on a Windows
PC or macOS. The application and the User's Manual can be downloaded from
www.lightware.com.
ç Install and Upgrade
ç Running the LDC
ç Establishing the Connection
ç Video Crosspoint Menu
ç Properties Windows - Video Layer
ç Audio Crosspoint Menu
ç Properties Windows - Audio Layer
ç Diagnostic Tools
ç EDID Management Menu
ç Control Menu
ç Settings Menu
ç Configuration Cloning (Backup Tab)
ç Terminal Window
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
6.1. Install and Upgrade
INFO:
After the installation, the Windows and the macOS application has the same look and functionality.
Minimum System Requirement
RAM: 1 GB
Installation for Windows OS
Run the installer. If the User Account Control drops a pop-up message click Yes.
During the installation you will be prompted to select the type of the installation: normal and the snapshot
install:
Normal install
Available for Windows and macOS
The installer can update only this instance
Only one updateable instance can exist for all users
Comparison of installation types

ATTENTION! Using the Normal install as the default choice is highly recommended.
Installation for macOS
Mount the DMG file with double clicking on it and drag the LDC icon over the Applications icon to copy the
program into the Applications folder. If you want to copy the LDC into another location just drag the icon
over the desired folder.
Upgrading of LDC
Step 1. Run the application.
The Device Discovery window appears automatically and the program checks the available updates on
Lightware's website and opens the update window if the LDC found updates.
The current and the update version number can be seen at the top of the window and they are shown in this
window even with the snapshot install.
The Update window can also be opened by clicking the About icon
Step 2. Set the desired update setting in the Options section.
▪ If you do not want to check for the updates automatically, uncheck the circle, which contains the green
tick.
▪ If you want to postpone the update, a reminder can be set with different delays from the drop down list.
If the proxy settings traverse the update process, set the proper values then click the OK button.
▪
Step 3. Click the Download update button to start the upgrading.
The updates can be checked manually by clicking the Check now button.
Snapshot install
Available for Windows
Cannot be updated
More than one different version can be installed for all users
? and the Update button.
55 55