Hashtag Keyword List - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
12. Appendix 12. Appendix
12.13. Hashtag Keyword List
This user's manual contains keywords with hashtag (#) to help you to
find the relevant information as quick as possible.
The format of the keywords is the following:
#<keyword>
The usage of the keywords: use the Search function (Ctrl+F / Cmd+F)
of your PDF reader application, type the # (hashtag) character and the
wished keyword.
The #new special keyword indicates a new feature/function that has
just appeared in the latest firmware or software version.
Example
#dhcp
This keyword is placed at the DHCP (dynamic IP address) setting in
the front panel operation, the Lightware Device Controller (LDC) and
the LW3 programmer's reference section.
The following list contains all hashtag keywords placed in the
document with a short description belonging to them. The list is in
alphabetical order by the hashtag keywords.
Hashtag Keyword 
#advancedview Advanced view window
#analogaudio Analog audio related settings
#applicationmode Application mode (extender/matrix) setting
#audio Audio related settings
#backup Configuration cloning (backup)
#balance Balance (for analog audio) setting
#bootload Bootload mode setting
#colorspace Color space converter related settings
#configurationcloning Configuration cloning (backup)
#controllock Control lock
#crosspoint Crosspoint switch setting
#csc Color space converter related settings
#devicelabel Device label
#dhcp Dynamic IP address (DHCP) setting
#edid EDID related settings
#ethernet Ethernet port settings
Hashtag Keyword 
#extendermode
#factory
#firmwareversion
#framedetector
#frc
#freerun
#gain
#hdcp
#identifydisplay
#identifyme
#identifystream
#infra
#ipaddress
#ir
#jogdial
#label
#log
Description
#mac
#matrixmode
#message
#mute
#network
#nosyncscreen
#operationmode
#portstatus
#power5v
#reboot
#receiver
#reset
#restart
#rotary
#rs232
#rs-232
#rx
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Description
Application mode (extender/matrix) setting
Factory default settings
Firmware version query
Frame detector in LDC
Frame rate converter related settings
Timing mode setting
Gain (for analog audio) setting
HDCP-encryption related setting
Identify display feature
Identify me (identify the device) feature
Identify stream feature
Infrared port related settings
IP address related settings
Infrared port related settings
Jog dial control knob related settings
Device label
System log
MAC address query
Application mode (extender/matrix) setting
Message sending via communication ports
Mute (for analog audio) setting
Network (IP address) related settings
Test pattern (no sync screen) settings
Operation mode (TX/RX/TRX) setting
Source/destination port status query
Power 5V mode setting
Restarting the device
Operation mode (TX/RX/TRX) setting
Restarting the device
Restarting the device
Jog dial control knob related settings
RS-232 related settings
RS-232 related settings
Operation mode (TX/RX/TRX) setting
Hashtag Keyword  Description
#scaler Scaler related settings
#serial RS-232 related settings
#sfp SFP+ module monitoring information
#sourcelocked Timing mode setting
#status Status query
#streamenable Stream enable/disable setting
#switch Crosspoint switch setting
#terminal Advanced view window
#testpattern Test pattern (no sync screen) settings
#timingmode Timing mode setting
#transceiver Operation mode (TX/RX/TRX) setting
#transmitter Operation mode (TX/RX/TRX) setting
#trx Operation mode (TX/RX/TRX) setting
#tx Operation mode (TX/RX/TRX) setting
#unmute Unmute (for analog audio) setting
#volume Volume (for analog audio) setting
144 144