Transceiver-Transceiver Pair - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
1. Introduction 1. Introduction
1.6.2. Transceiver-Transceiver Pair
Application diagram of Extender mode - TRX-TRX pair
Description
Two UBEX transceivers are connected each other via 400 m fiber optical cables.
The UBEX-PRO20-HDMI-F100 transceiver connects to a D3 media server which is the source and the sink
device together. The incoming stream can be checked locally on the local monitor.
The UBEX-PRO20-HDMI-F110 transceiver has a source device (camera) and a sink device (4K projector). The
projector is controlled via RS-232 interface by the extender.
Thanks to the 20G full-duplex SFP+ interface the transceiver has no bandwidth limitation on the input and
output sides either. The device is able to receive and transmit 2x 4K60 Hz 4:4:4 24 bit streams.
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
13 13