Lightware UBEX-PRO20-HDMI-F110 User Manual page 143

 
     
12. Appendix 12. Appendix
Activity
EDID Management
Copy / save a user EDID
Create EDID
Delete a user EDID
Edit an EDID
Reset the emulated EDIDs
Switch (emulate)
Query the emulated EDID
Diagnostics
Frame detector
No sync screen (test pattern) color
(RX)
No sync screen (test pattern) color
(TRX)
No sync screen (test pattern) mode
(RX)
No sync screen (test pattern) mode
(TRX)
RS-232 Interface
RS-232 port configuration
Sending ASCII-format text
Sending ASCII-format message
Sending binary message
Infrared Interface
Change command injection port
number
Enable command injection
Enable output signal modulation
Enable the port
Sending pronto hex message in big-
endian format
Sending pronto hex message in little-
endian format
Front LDC LW3
panel sw. comm.
5.6.3 6.9.1 7.11.5 DHCP (dynamic IP address) setting
- 6.9.3 - Gateway address change (static)
- 6.9.1 7.11.6 IP address query
- 6.9.2 - IP address setting (static)
- 6.9.1 7.11.7 Subnet mask change (static)
5.6.2 6.9.1 7.11.4
5.6.1 6.9 7.11.1 Bandwidth limitation indicator query
Bandwidth query
- 6.8.1 - General status query
Link aggregation status query
5.4.1 6.8.2 7.5.14
SFP+ module information query
5.5.2 6.8.2 7.6.14
5.4.1 6.8.2 7.5.13
5.5.2 6.8.2 7.6.13
- 6.10.2 7.13
- - 7.15.1
- 6.10.2 7.15.3
- - 7.15.2
- 6.10.3 7.14.3
- 6.10.3 7.14.2
- - 7.14.4
- 6.10.3 7.14.1
- - 7.15.5
- 6.10.3 7.15.4
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Front LDC
Activity
panel sw. comm.
Network
5.8.1 6.11.2 7.12.2
5.8.1 6.11.2 7.12.9
5.8.1 6.11.2 7.12.4
5.8.1 6.11.2 7.12.5
5.8.1 6.11.2 7.12.7
SFP+ Interface
- 6.5.10
5.7 6.5.9
5.7 6.5.9
5.7 6.5.11
5.7 6.5.9
LW3
7.9.8
7.9.7
-
7.9.9
7.10
143 143