Lightware UBEX-PRO20-HDMI-F110 User Manual page 106

 
     
7. Programmers' Reference 7. Programmers' Reference
Audio Port Settings
Query the Status of Source Port
ç GET•/MEDIA/AUDIO/XP.SourcePortStatus
Query the Status of Destination Port
ç GET•/MEDIA/AUDIO/XP.DestinationPortStatus
Query the Audio Crosspoint Setting
ç GET•/MEDIA/AUDIO/XP.DestinationConnectionList
Audio Stream Switching
ç CALL•/MEDIA/AUDIO/XP:switch(<source>:<destination>)
Enable/Disable the Audio Stream
ç SET•/MEDIA/AUDIO/<source|destination>.Enabled=true|false
Analog Audio Port Settings
Setting the Volume in dB
SET•/MEDIA/AUDIO/<in|out>.VolumedB=<volume>
ç
Setting the Volume in Percent
SET•/MEDIA/AUDIO/<in|out>.VolumePercent=<percent>
ç
Setting the Balance
SET•/MEDIA/AUDIO/<in|out>.Balance=<balance>
ç
Setting the Gain
SET•/MEDIA/AUDIO/<in>.Gain=<gain>
ç
Mute/Unmute the Analog Audio Output Port
SET•/MEDIA/AUDIO/<out>.Mute=<logical_value>
ç
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
System Monitoring Commands
Query Connected Device Presence
ç GET•/MEDIA/VIDEO/<in|out>.Connected
Query Video Signal Presence
ç GET•/MEDIA/VIDEO/<in|out|source|destination>.SignalPresent
Query Embedded Audio Presence
ç GET•/MEDIA/VIDEO/<in|out|source|destination>.EmbeddedAudioPresent
Query the Status of the Analog Audio Output
ç GET•/MEDIA/AUDIO/<out>.MuteStatus
Query the Signal Type
ç GET•/MEDIA/VIDEO/<source|destination>.SignalType
Query the Resolution of the Stream
ç GET•/MEDIA/VIDEO/<source|destination>.Resolution
Query the Bandwidth of the Stream
ç GET•/MEDIA/VIDEO/<source|destination>.Bandwidth
Query the Bandwidth Limitation Indicator
ç GET•/MEDIA/VIDEO/<source|destination>.BandwidthLimitExceeded
Query the Link Aggregation Status
ç GET•/SYS/MB/UPLINK/<link>.LinkState
SFP+ Module Information
Query the Vendor
ç GET•/SYS/MB/UPLINK/<link>/SFP.VendorName
Query the Part Number
ç GET•/SYS/MB/UPLINK/<link>/SFP.PartNumber
Query the Compliance
ç GET•/SYS/MB/UPLINK/<link>/SFP.Compliance
Query the Maximum Allowed Cable Length
ç GET•/SYS/MB/UPLINK/<link>/SFP.MaxLinkLength
Query the Type of the Module
ç GET•/SYS/MB/UPLINK/<link>/SFP.Type
106 106