Set The Audio Streams - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
3. Installation 3. Installation
3.6.8. Set the Audio Streams
The audio crosspoint menu in the LDC software for an F110 TX-RX pair
Crosspoint Settings
Set up the audio crosspoint settings. Digital and analog audio source streams are also selectable in the case
of UBEX-PRO20-HDMI-F110 endpoint device. All audio streams can be selected to all outputs.
See more details about the audio crosspoint settings in LDC in the
Analog Audio Settings
Set the volume and the balance for the analog audio input and output ports. You can also set the gain for
input port. The output can be muted or unmuted.
See more details about these settings in the
Audio Crosspoint Menu section.
Properties Windows - Audio Layer section.
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual 34 34