Query The Status Of Destination Port; Enable/Disable The Stream - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
7. Programmers' Reference 7. Programmers' Reference
The Most Common Received Port Status Responses
T 0
0 0 0 0
T000A
Reserved
Reserved Reserved
T 0
0 0 0 0
T00AA
Reserved
Reserved Reserved
T 0
0 0 0 0
T00AB
Reserved
Reserved Reserved
T 0
0 0 0 0
T00AF
Reserved
Reserved Reserved
T 0
0 0 0 0
T00EF
Reserved
Reserved Reserved
T 0
0 0 0 0
T00BF
Reserved
Reserved Reserved
T 0
0 0 0 0
T00FF
Reserved
Reserved Reserved
0 0
0 0 0 0 0 0 0 0 1 0
Reserved Reserved Unknown Unknown No signal
0 A
0 0 0 0 1 0 1 0 1 0
No embedded Not
Reserved Reserved No signal
audio encrypted
0 A
0 0 0 0 1 0 1 0 1 0
No embedded Not
Reserved Reserved No signal
audio encrypted
0 A
0 0 0 0 1 0 1 0 1 1
No embedded Not Signal
Reserved Reserved
audio encrypted presents
0 E
0 0 0 0 1 1 1 0 1 1
Embedded Not Signal
Reserved Reserved
audio presents encrypted presents
0 B
0 0 0 0 1 0 1 1 1 1
No embedded Signal
Reserved Reserved Encrypted
audio presents
0 F
0 0 0 0 1 1 1 1 1 1
Embedded Signal
Reserved Reserved Encrypted
audio presents presents
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
7.6.2. Query the Status of Destination Port
A Command and Response
ç GET•/MEDIA/VIDEO/XP.DestinationPortStatus
1 0
pr•/MEDIA/VIDEO/XP.DestinationPortStatus=<out_status>;...;<out_status>
æ
Not
connected The response contains 5 ASCII characters for each port. The first character indicates the mute/lock state,
the next 2-byte long HEX code showing the current state of the output ports.
A
Legend
1 0
See at previous section.
Not
Example
connected
ç GET /MEDIA/VIDEO/XP.DestinationPortStatus
B
æ pr /MEDIA/VIDEO/XP.DestinationPortStatus=T00BF;T00EF
1 1
Example and Explanation (for output 1, T00BF)
Connected
T
0 0
F
Reserved
Reserved
1 1
Connected 7.6.3. Enable/Disable the Stream
Command and Response
F
SET•/MEDIA/VIDEO/<source>.Enabled=<logical_value>
ç
1 1
pw•/MEDIA/VIDEO/<source>.Enabled=<logical_value>
æ
Connected
Parameters
Identifier
F
1 1
<logical_value>
Connected
Example
ç SET /MEDIA/VIDEO/S1.Enabled=true
F
æ pw /MEDIA/VIDEO/S1.Enabled=true
1 1
Connected
#poststatus
0 0 B
0 0 0 0 0 0 1 0
No embedded
Reserved Reserved Reserved
audio
#streamenable
Parameter description Value
true The stream is enabled (unmuted).
The stream is unmuted or
muted.
false The stream is disabled (muted).
89 89
F
1 1 1 1 1 1
Signal
Encrypted Connected
presents
Explanation