Lightware UBEX-PRO20-HDMI-F110 User Manual page 110

 
     
8. Firmware Upgrade 8. Firmware Upgrade
Discovering the Devices
After launching LDU2 the device discovery an empty window appears. Click on the Search for devices button
to start finding the Lightware devices on the network.
Device discovery is in progress in LDU2
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
Device List
When the discovery has completed, the devices available on the network are listed in the application.
Legend of the Icons
Icon Name
Identify the device

IP address editor

Further information available

Service mode
  Favorite device
Description
Clicking on the icon causes the four front panel LEDs blink
in green for 10 seconds. The feature helps to identify the
device itself in the rack shelf.
To modify IP address settings quickly it is not necessary to
enter the device's settings/network menu, you can set them
by clicking the pencil icon next to the IP address.
Device is unreachable. Change the IP address using the
front panel LCD menu or the IP address editor of the LDU2.
The device is in bootload (service) mode. The firmware
upgrade procedure can be continued in this mode.
Frequently used devices can be highlighted with the star
icon as favorite unit. In this case the star becomes orange
filled.
110 110