Lw3 Protocol Commands - Quick Summary - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
7. Programmers' Reference 7. Programmers' Reference
7.16. LW3 Protocol Commands - Quick Summary
System Commands
Set the Device Label
SET•/MANAGEMENT/LABEL.DeviceLabel=<Custom_name>
ç
Querying the Product Name
ç GET•/.ProductName
Query the Firmware Package Version
ç GET•/MANAGEMENT/UID/PACKAGE.Version
Display Custom Text on the LCD
ç CALL•/MANAGEMENT/UI:displayMessage(<text>)
Display Custom Color on the LCD
ç CALL•/MANAGEMENT/UI:testDisplay(<mode>,<hex_code>)
Identify the Device
ç CALL•/MANAGEMENT/UI:identifyMe()
Query the Operation Mode
ç GET•/SYS/MB.OperationMode
Set the Operation Mode
CALL•/SYS/MB.setOperationModeAndReset=<operation_mode>
ç
Query the Application Mode
ç GET•/SYS/MB.ApplicationMode
Application Mode Selection
SET•/SYS/MB.ApplicationModeSelection=<application_mode>
ç
Setting the Rotary Direction of the Jog Dial Knob
SET•/MANAGEMENT/UI.RotaryDirection=<parameter>
ç
Setting the Brightness of the LCD Screen
SET•/MANAGEMENT/UI.DisplayBrightness=<parameter>
ç
Control Lock
SET•/MANAGEMENT/UI.ControlLock=<parameter>
ç
Bootload Mode Setting
ç CALL•/SYS:bootload()
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
Restarting the Device
ç CALL•/SYS:reset()
Restore the Factory Default Settings
ç CALL•/SYS:factoryDefaults()
Video Port Settings - Transmitter Mode
Query the Status of Source Port
ç GET•/MEDIA/VIDEO/XP.SourcePortStatus
Query the Status of Destination Port
ç GET•/MEDIA/VIDEO/XP.DestinationPortStatus
Query the Video Crosspoint Setting
ç GET•/MEDIA/VIDEO/XP.DestinationConnectionList
Switching the Stream
ç CALL•/MEDIA/VIDEO/XP:switch(<source>:<destination>)
Enable/Disable the Stream
SET•/MEDIA/VIDEO/<source>.Enabled=<logical_value>
ç
Identify Stream
ç CALL•/MEDIA/VIDEO/<source>:identify()
Resolution Setting
SET•/MEDIA/VIDEO/<source>.ResolutionSetting=<resolution>
ç
Resolution Mode Setting
SET•/MEDIA/VIDEO/<source>.ResolutionMode=<resolution_mode>
ç
Scaler - Image Position Setting
SET•/MEDIA/VIDEO/<source>.ImagePosition=<image_position>
ç
Color Space Converter Setting
SET•/MEDIA/VIDEO/<source>.ColorSpaceSetting=<color_space>
ç
Query the Timing Mode
ç GET•/MEDIA/VIDEO/<source>.TimingMode
HDCP Setting (Input Port)
SET•/MEDIA/VIDEO/<in>.HdcpEnable=<logical_value>
ç
HDCP Setting (Output Port)
SET•/MEDIA/VIDEO/<out>.HdcpMode=<HDCP_mode>
ç
104 104