3. Installation
3. Installation
Step 4. As a final step, mount the unit in the rack.
ATTENTION!
Always use all the four screws for fixing the rack ears to the rack rail. Choose properly sized
screws for mounting. Keep minimum two thread left after the nut screw.
Mounting the rack ears to the rack rail
Standard rack installation
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
UBEX series – Extender Application Mode – User's Manual
UBEX series – Extender Application Mode – User's Manual
22
22