Lightware UBEX-PRO20-HDMI-F110 User Manual page 111

 
     
8. Firmware Upgrade 8. Firmware Upgrade
Upgrade Steps
Step 1. Select the firmware package.
Click on the Select Firmware Package button and navigate to the location where the LFP2 file of the UBEX
endpoint is saved. When you click on the name of package, the preview of the release notes are displayed on
the right side.
Firmware file browser and the release notes window
After the package file is loaded, the list is filtered to show compatible devices only. The current firmware
version of the device is highlighted in orange if it is different from the version of the package loaded.
Filtered device list based on the selected firmware package
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
Step 2. Select the remote unit first for upgrading.
Pick the remote device for upgrading. The selected line will be highlighted in green.
The remote unit is selected for upgrading

TIPS AND TRICKS: If you are not sure which device is connected to your controller device directly, use
the Identify me feature clicking on the button. It makes the four front panel LEDs blink in green for 10

seconds. The feature helps to identify the device itself in the rack shelf or on the desk.
111 111