Removing An M.2 Ssd - Fujitsu PRIMERGY TX2550 M5 Upgrade And Maintenance Manual

System board and components
For Japan
In order to setup the ESXi, see the corresponding version of the
"VMware vSphere Software Description" from the following URL and
reinstall ESXi to the M.2 SSD.
https://jp.fujitsu.com/platform/server/primergy/software/vmware/manual/
14.6.3

Removing an M.2 SSD

Upgrade and Repair Unit
(URU)
– Phillips PH1 / (+) No. 1 screw driver
Tools:
– Hexagon screw driver (for moving the screw to another hexagon
stand-off)
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the system air duct" on page
▶
"Removing the PCI air duct" on page
▶ If applicable, remove the riser module, see
page 86.
▶
"Removing the crossbar" on page
▶ If applicable, remove the expansion card, see
card" on page 358.
496
49.
88.
90.
Upgrade and Maintenance Manual
Hardware: 5 minutes
50.
51.
67.
"Removing the riser module" on
"Removing an expansion
TX2550 M5