Replacing The Defective Cmos Battery; Concluding Steps - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

14.2.1.2 Replacing the defective CMOS battery

1
Figure 183: Replacing the CMOS battery
Ê Press the locking spring into direction of the arrow (1), so that the CMOS
battery jumps out of its socket.
Ê Remove the CMOS battery (2).
V
CAUTION!
Sharp tools such as screw drivers might damage system board
components in case of slipping.
If the CMOS battery cannot be ejected without the help of a tool, it is
recommended to use a tooth pick.
Ê Insert a new CMOS battery of the same type into the socket (3) and (4).

14.2.1.3 Concluding steps

Ê Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 55
Ê
"Switching on the server" on page 57
Ê
"Verifying system information backup / restore" on page 73
Ê
"Verifying the system time settings" on page 80
Ê
RX1330 M1
2
Upgrade and Maintenance Manual
System board and components
4
3
253