Preliminary Steps; Replacing The Defective Cmos Battery - Fujitsu PRIMERGY RX2530 M1 Upgrade And Maintenance Manual

15.2.1.1 Preliminary steps

"Locating the defective server" on page 45
Ê
"Shutting down the server" on page 48
Ê
"Disconnecting the server from the mains" on page 49
Ê
"Getting access to the component" on page 49
Ê
Ê Remove the air guide on CPU 2 as described in section
air guides" on page

15.2.1.2 Replacing the defective CMOS battery

1
Figure 217: Replacing the CMOS battery
Ê Press the locking spring into direction of the arrow (1), so that the CMOS
battery jumps out of its socket.
Ê Remove the CMOS battery (2).
V
CAUTION!
Sharp tools such as screw drivers might damage system board
components in case of slipping.
If the CMOS battery cannot be ejected without the help of a tool, it is
recommended to use a tooth pick.
Ê Insert a new CMOS battery of the same type into the socket (3) and (4).
RX2530 M1
68.
2
Upgrade and Maintenance Manual
System board and components
"Removing the CPU
4
3
299