Installing The New Pcie Ssd Backplane; Concluding Steps - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
7.5.2.3

Installing the new PCIe SSD backplane

Figure 177: Installing the PCIe SSD backplane
Ê At a slight angle, fit the PCIe SSD backplane into the three recesses in the
PCIe SSD extension box (1).
Ê Fold down the PCIe SSD backplane (2).
Ê Fasten the PCIe SSD backplane with two screws (see figure 175).
Ê Install the 8x 2.5-inch PCIe SSD extension box as described in section
"Installing the 8x 2.5-inch HDD extension box" on page
7.5.2.4

Concluding steps

"Installing the system fan holder" on page 94
Ê
"Installing the system air duct" on page 92
Ê
"Reassembling" on page 74
Ê
Ê Reinstall all 2.5-inch PCIe SSDs SFF into their original slots in the PCIe SSD
extension box as described in section
modules" on page
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
Ê
264
173.
Upgrade and Maintenance Manual
238.
"Installing 2.5-inch HDD/SSD
TX2560 M2 / RX2560 M2