Replacing A Pcie Card In A Riser Module; Preliminary Steps; Removing The Defective Pcie Card; Installing The New Pcie Card - Fujitsu PRIMERGY GX2460 M1 Upgrade And Maintenance Manual

Expansion cards and riser modules
9.5.3

Replacing a PCIe card in a riser module

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver / hexagon screw driver 5 mm
9.5.3.1

Preliminary steps

"Locating the defective server" on page 39
Ê
"Shutting down the server" on page 40
Ê
"Disconnecting the power cord" on page 41
Ê
"Getting access to the component" on page 42
Ê
"Removing the rear top cover" on page 47
Ê
Ê If applicable, disconnect external cables from the PCIe card.
9.5.3.2

Removing the defective PCIe card

Ê Remove the riser module, see section
riser module" on page
Ê Remove the defective PCIe card, see section
page 150.
9.5.3.3

Installing the new PCIe card

Ê Install the new PCIe card, see section
Ê Install the riser module, see section
riser module" on page
9.5.3.4

Concluding steps

"Installing the rear top cover" on page 48
Ê
"Reassembling" on page 50
Ê
"Connecting the power cord" on page 53
Ê
152
133.
137.
Upgrade and Maintenance Manual
Hardware: 15 minutes
"Removing the left or right PCIe/GPU
"Removing a PCIe card" on
"Installing a PCIe card" on page
"Installing the left or right PCIe/GPU
147.
GX2460 M1