5.2.3 Nozzle check
Used to check whether there are any head clogging, missing nozzles or misfiring nozzles.
Notes
If the nozzle check result indicates that the checked points are blurred or missing, clean the head.
See Head cleaning.
Perform the nozzle check once again after the head has been cleaned.
Notes
For the printing procedure, refer to "Performing a test print".
5.2.4 Mode Print
Used to confirm the following printing conditions:
Print mode
Effect
Adjustment value
Notes
For the printing procedure, refer to "Performing a test print".
Operation Instructions ValueJet 1604W
Chapter 5 : Preparations before printing
59
AP-77300 – Rev 1.1 -17/09/2009,