Head Slant Check Menu - MUTOH spitfire 90 Maintenance Manual

5.5.4. Head Slant Check Menu

This menu prints out a sample printing to check for head slant.
Item
Slant
Front and back
All
end
5.5.4.1Head slant adjustment
Step 1 :
Start the self-diagnostic function.
Notes :
Step 2 :
Select "Adj:HeadSlant".
Step 3 :
Print "Slant" pattern.
If dotted lines on pattern CW and CCW are not a straight line, which you can check with a
magnifying glass (enlargement of at least 10), please go to step 4.
Notes :
When the printing pattern is printed, you will only see lines, and no notifications of ink
channels. The head sequence shown below.
4 head model: 1A, 1B, 2A, 2B, 3A, 3B, 4A, 4B
Step 4 :
Loosen the screw (with one turn) fixing the head stationary plate.
Description
All head slant check.
Front and back position and slant of each head relative to the reference head check.
Confirmation of the forward and rear positions for all nozzle rows and all heads.
Check complete.
Refer to "Self-Diagnosis Function"
No.
1 Screw (M2.5x5) fixing the head stationary plate
2 Angle adjustment screw
3 Front and back adjustment screw
Part
159
Spitfire – Maintenance Manual
AP-74096, Rev. 1.0, 09/06/05