Set3: Initial Settings - MUTOH ValueJet VJ-426UF Operation Manual

Set3: Initial Settings

Set 3 : Init.Settings>
Initial1: Language
Initial1 :
Initial2: Length
Initial2 :
Initial3: Remain Ink
Initial3 :
Display language or unit for LCD is configured. IP addresses are also configured.
Submenus
Initial1 :
Initial2 :
Initial3 :
Initial4 :
Initial5 :
Initial6 :
For setting the language that will be displayed.
Language
Setting values
Lang. :
Lang. :
For setting the length units that will be displayed.
Length
Setting values
Length :
Length :
For setting how the remaining ink amount will be displayed.
Remain Ink
Setting values
Remain Ink :
Remain Ink :
Language
Length
Remain Ink
IP Address
Subnet Mask
Gateway
Displays will be in English.
English
This is the default setting.
Displays the menu items in Japanese.
Japanese
Displays the length in millimeters (mm).
mm
Displays the length in inches (inch).
inch
Remaining ink icons will be displayed.
On
Remaining ink icons will not be displayed.
Off
Slot numbers and remaining ink will be
displayed in numerals.
"Initial1: Language" on page 67
"Initial2: Length" on page 67
"Initial3: Remain Ink" on page 67
"Initial4: IP Address" on page 68
"Initial5:Subnet Mask" on page 68
"Initial6: Gateway" on page 68

Set3: Initial Settings

67