Moving Or Transporting The Printer; Moving The Printer - MUTOH ValueJet VJ-1628X Operation Manual

VJ-1628X OPERATION MANUAL
6.6

Moving or transporting the printer

This section describes how to move or transport the printer.
6.6.1

Moving the printer

This section describes how to move the printer.
CAUTION
• When moving the printer, make sure to maintain a horizontal position.
• Do not slant the printer, prop it against a wall or turn it upside down.
The ink inside the printer may leak.
Moreover, normal operation after shifting (to these positions) cannot be guaranteed.
(1) Preparation before moving
When using the dedicated Stands, follow the procedure below to move the printer.
1. Make sure that the printer is turned OFF.
3.2.2 Turning the power OFF
2. Dispose of waste fluid.
6.5 Disposal of waste fluids
3. Remove all the cables, such as Power cord set.
4. Insert dummy cartridges into the slots.
1
2
No.
1
2
5. Loosen the four adjusters of Stand as shown in the next illustration.
6.6 Moving or transporting the printer
Dummy cartridge
Ink cartridge slot
1
2
Name
Maintenance
319