Selecting Test Features
Setting Overhead Labels
Setting Overhead Labels
Description
Choosing LABELS allows the setting of the S1 SYNC STATUS, HP PATH LABEL
(C2) and LP PATH LABEL (V5).
How to Edit User Defined Labels
1 Choose the overhead label that you want to edit.
2 Edit the label using the softkeys at the bottom of the display. If you select USER,
use
the softkeys and pop-up keypad to edit the label. Detailed instructions on how to
change instrument settings using the pop-up keypad is given in the Quick Start
Guide (page 13) under the heading "Changing Instrument Settings".
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
the softkeys at the bottom of the display to edit the label key, or press
then use
SET
,
59