Install The Module Driver - Agilent Technologies U2722A User Manual

C. Install the module driver
N O T E
1 Verify that your PC meets the minimum system requirements as stated
2 Insert the Product Reference CD-ROM into your CD-ROM drive.
3 The installer will automatically launch the Agilent Modular Products
4 If the menu does not launch automatically, go to Start > Run (on the
5 Follow the instructions on the screen and click Next to proceed.
6 Click Install to begin the installation. Follow the instructions on the
7 Click Finish when the installation has completed.
U2722A/U2723A User's Guide
Please ensure that there are no instruments connected to the PC when
installing the driver.
in "A. Check your system"
Installation Menu. Click Hardware Driver to begin the installation.
Windows Start menu) and type <drive>:\Driver\Hardware\
setup_Hw.exe where <drive> is your CD-ROM drive location. Click
OK to begin the installation.
screen to proceed with the installation.
on page 13.
Getting Started 1
15