Using Compactflash™ Cards; Installing Compactflash™ Cards; Configuring Compactflash™ Cards - Agilent Technologies WireScope 350 User Manual

V†vtÃXv…rTp‚ƒr
V†vtÃ8‚€ƒhp‡Ayh†uŒÃ8h…q†
Using CompactFlash™ Cards
Installing CompactFlash™ Cards
Configuring CompactFlash™ Cards
2−6
The WireScope 350 can use CompactFlash™ cards for storing large
amounts of test data, for transferring data to a PC, and for installing new
software.
To install a CompactFlash™ card:
1 Find the CompactFlash™ card slot in the bottom of the WireScope
350. See CompactFlash™ Slot, on page 1-3, for the location of the
slot.
2 Insert the CompactFlash™ card into the slot.(If the card does not go
in easily, make sure it is oriented correctly with the lip on the
bottom.)
3 The WireScope detects the card, and asks if you want to configure the
card.
When a CompactFlash™ card is inserted in the WireScope 350, the tester
detects it and displays a window asking if you want to configure the
card.
To configure an installed CompactFlash™ card:
1 Insert the card in the slot at the bottom of the WireScope. The
Storage window opens.