Installing The Cary 60 Driver; Registering And Validating Your Cary 60 - Agilent Technologies Cary 60 User Manual

Installing the Cary 60 Driver

To install the Cary 60 driver:
1
2
The Cary 60 driver will now be installed.

Registering and Validating Your Cary 60

To register and validate your Cary 60:
1
2
3
The product key is found on the CD case.
NOTE
4
5
6
7
8
9
10 Click Start when the Validate application appears.
Agilent Cary 60 Spectrophotometer User's Guide
Turn on the Cary 60.
The Cary 60 will calibrate for approximately 2 minutes. The
'Found New Hardware Wizard' dialog box will appear.
Select Install this driver software anyway and then click Next.
Double-click the Cary WinUV icon on your computer desktop.
Double-click the 'Validate' application.
The Agilent Software Registration dialog box appears.
Click Next and follow the instructions.
Click Add next to the 'Instrument Model' section of 'Product
Details' dialog box.
Choose Cary from the 'Instrument Type' drop-down box.
Select the Model Name.
Enter the Cary 60 serial number. See Figure 2.
In the Accessories section, repeat Steps 4-7 for all accessories
ordered.
Click Next and follow the instructions to finish registration.
Installation
25