Dimm 0 - IBM iSeries Series Hardware Problem Analysis And Isolation

Hide thumbs Also See for iSeries Series:

Table of Contents

3. Exchange the failing item.

Note: If the terminating plug is located on a backplane, go to symbolic FRU "BACKPLN" on page 284.

Follow the procedure until the terminating plug is accessible and then remove or exchange the plug.

This ends the procedure.

DIMM 0

For use by authorized service providers.

Use this page to view the locations of DIMM 0, DIMM 1, DIMM 2 and DIMM 3 on the 2890 and 2892

Integrated xSeries Server (IXS) cards.

Figure 1. Locations of DIMM 0, DIMM 1, DIMM 2 and DIMM 3 on 2890 Integrated xSeries Server (IXS)

Figure 2. Locations of DIMM 0, DIMM 1, DIMM 2 and DIMM 3 on 2892 Integrated xSeries Server (IXS)

In both figures, the first DIMM from the top of the IXS card (DIMM 0) is the failing item. To determine the

part number, go to symbolic FRU "MEMORY" on page 401.

This ends the procedure.

iSeries: iSeries Server 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Hardware Problem Analysis and