IBM iSeries Series Hardware Problem Analysis And Isolation page 444

Table 4. FC 5075 Expansion I/O Frame
Unit reference code
1510, 1511, 1512, 1513, 1514, 1516
1520, 1521, 1522, 1523, 1524, 1526
Table 5. FC 5078, FC 0578, FC 5088, or FC 0588 Expansion I/O Frame
Unit reference code
1510, 1511, 1512, 1513, 1514, 1516
1520, 1521, 1522, 1523, 1524, 1526
Table 6. FC 5065, FC 5066, FC 5074, FC 5079, FC 9074, FC 9079 (single line cord), Expansion
I/O Frame
Unit reference code
1510, 1511, 1512, 1513, 1514, 1516
1520, 1521, 1522, 1523, 1524, 1526
1530, 1531, 1532, 1533, 1534, 1536
Table 7. FC 5094, FC 9094 (dual line cord), Expansion I/O Frame
Note: For reference codes 1500, 1510, 1520, and 1530, perform "Power PIP11" on page 175
before replacing parts.
Unit reference code
1500, 1501, 1502, 1503, 1504, 1506
1510, 1511, 1512, 1513, 1514, 1516
1520, 1521, 1522, 1523, 1524, 1526
1530, 1531, 1532, 1533, 1534, 1536
Note: Do not install power supplies P00 and P01 ac jumper cables on the same AC input module.
This ends the procedure.
2. Is the SRC 1xxx-1Bxx?
v No: Continue with the next step.
v Yes: Perform the following:
a. Find the unit reference code in the following table to determine the failing power supply.
b. Refer to Locations and addresses to determine the location and part number of the failing item.
c. Replace the failing power supply.
d. Perform the following if the new power supply does not fix the problem:
1) Reinstall the original power supply.
2) Try the new power supply in each of the other positions listed in the table.
3) If the problem still is not fixed, reinstall the original power supply and go to the next FRU in
the list.
Table 9. For FC 7104 (internal expansion)
Unit reference code
1B13, 1B14, 1B16, 1B17
This ends the procedure.
432
iSeries: iSeries Server 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Hardware Problem Analysis and
Isolation
Power supply
P01
P02
Power supply
P02
P01
Power supply
P01
P02
P03
Power supply
P00
P01
P02
P03
Power supply
P02