Removing And Replacing Memory And Memory Risers In The 8335-Gtb; Removing And Replacing Memory Dimm In The 8335-Gtb - IBM Power System S822LC Manual

Figure 85. Secure the cold plate retainer screw
c. Return the service hook to its latched position on the bracket.
6. Place the protective covers on the bottom of the replaced GPUs. This protects the pins when returning
the GPU.
What to do next
Prepare the system for operation. For instructions, see "Preparing the 8335-GTB system for operation after
you remove and replace internal parts" on page 198.

Removing and replacing memory and memory risers in the 8335-GTB

Learn how to remove and replace memory and memory risers in the IBM Power System S822LC
(8335-GTB) system.

Removing and replacing memory DIMM in the 8335-GTB

Learn how to remove and replace memory DIMM in the IBM Power System S822LC (8335-GTB) system.
Before you begin
Power off the system and place it in the service position. For instructions, see "Preparing the 8335-GTB
system to remove and replace internal parts" on page 195.
70
Power Systems: Servicing the IBM Power System S822LC (8335-GTB)