IBM iSeries Series Hardware Problem Analysis And Isolation page 498
Hide thumbs
Also See for iSeries Series:
Table of Contents
Advertisement
–
Processor 1 (See symbolic FRU "CCIN" on page 303 for the correct part.)
This ends the procedure.
4. Is the SRC 1xxx 8404?
v No: Continue with the next step.
v Yes: Exchange Processor 2. See symbolic FRU "CCIN" on page 303 for the correct part.
This ends the procedure.
5. Is the SRC 1xxx 8405?
v No: Continue with the next step.
v Yes: Exchange Processor 3. See symbolic FRU "CCIN" on page 303 for the correct part.
This ends the procedure.
6. Is the SRC 1xxx 8406?
v No: Continue with the next step.
v Yes: Exchange Processor 4. See symbolic FRU "CCIN" on page 303 for the correct part.
This ends the procedure.
7. Is the SRC 1xxx 8409?
v No: Continue with the next step.
v Yes: No processors are installed. If you are in test mode and have removed all the processors,
disregard this SRC. Otherwise, correctly install the processors.
If the processors are installed correctly, exchange all Processors. See symbolic FRU "CCIN" on
page 303 for the correct part.
This ends the procedure.
8. Is the SRC 1xxx 840A?
v No: Continue with the next step.
v Yes: Exchange the following part:
For Models 840, and SB3:
–
AC module (see symbolic FRU "ACMODUL" on page 268 for the correct part).
–
Tower card (see symbolic FRU "TWRCARD" on page 470 for the correct part).
For Models 830, and SB2:
–
Clock card (see symbolic FRU "CLCKCRD" on page 320 for the correct part).
–
Tower card (see symbolic FRU "TWRCARD" on page 470 for the correct part).
This ends the procedure.
9. Is the SRC 1xxx 840B?
v Yes: Continue with the next step.
v No: Go to step 17 (See page 487).
10.
Perform the following:
a.
Power off the system.
b.
Remove all processor and memory cards from the system.
c.
Power on the system.
Does the SRC 1xxx 840B appear on the panel?
v Yes: Continue with the next step.
v No: Go to step 15 (See page 487).
11.
Perform the following:
a.
Power off the system.
b.
Exchange the Clock card in the system unit.
c.
Power on the system.
Does the SRC 1xxx 840B appear on the panel?
486
iSeries: iSeries Server 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Hardware Problem Analysis and
Isolation
Advertisement
Table of Contents
