Working With Dimms; Installing A Dimm - IBM xSeries 305 Type 8673 Installation Manual

8. If you have other options to install, do so now; otherwise, go to "Completing the

Working with DIMMs

This section describes how to install a DIMM in the server. Before you begin, review
the following:
v Install additional DIMMs in DIMM connector 3 first; then, in DIMM connector 2
v The installing or removing of DIMMs changes the configuration information in the

Installing a DIMM

Complete the following steps to install a DIMM.
Note: The illustrations in this document might differ slightly from your hardware.
Attention:
damage from static electricity. For details on handling these devices, see "Handling
static-sensitive devices" on page 5.
1. Review the safety information beginning on page v and the "Installation
2. Turn off the server and peripheral devices. Disconnect the power cord; then, all
3. Touch the static-protective package containing the DIMM to any unpainted metal
10
xSeries 305 Type 8673: Installation Guide
b. Secure the drive to the drive cage using the screws that came with the
option.
c. Slide the drive cage back into the server and tighten the captive screw.
d. Connect the signal cable and power cable to the rear of the drive. Ensure
that the cables do not obstruct the fan in front of the air baffle.
installation" on page 11.
and DIMM connector 1. The DIMMs can be different sizes.
server. Therefore, you must change and save the new configuration information
by using the Configuration/Setup Utility program. When you restart the server, the
system displays a message indicating that the memory configuration has
changed. Start the Configuration/Setup Utility program and select Save Settings.
See the User's Guide, on the IBM Documentation CD for more information about
using the Configuration/Setup Utility program.
DIMM 4
When you handle static-sensitive devices, take precautions to avoid
guidelines" on page 5.
external cables. Remove the cover.
surface on the server. Then, remove the DIMM from the package.
DIMM 3