IBM iSeries Series Hardware Problem Analysis And Isolation page 275

Failing item code Description/Action
FI00871 continued FI00871 indicates that the attached tape device is the failing item.
v 6387 - Internal 1/4 inch cartridge drive with SLR100 on the front cover.
v 7207 Model 122 - External 1/4 inch cartridge drive with QIC-4GB-DC on the door, P/N
v 7208 Model 342 - External 8mm tape drive; refer to the device service information to
v 7208 Model 345 - External 8mm tape drive; refer to the device service information to
v 7239 Model 308 - External 1/4 inch cartridge tape library; refer to the device service
v 9348 - External 1/2 inch reel tape unit. Is one of the following status codes displayed
v Other device type: Refer to the device's service information to determine the part number
FI00872 FI00872 indicates that the interface is the failing item.
v Internal device: See FI01140 (See page 267).
v External device: See EXTSCSI
– For Models 270 and 820 system units use P/N 04N2567
– For Models 830, 840, 870, 890, SB2, and SB3 system units use P/N 53P2650
– For FC 5065, 5066, 5074, 5079 expansion towers use P/N 53P2650
59H4434.
determine the part number(s) to replace.
determine the part number(s) to replace.
information to determine the part number(s) to replace.
anywhere on the 9348 control panel? (x = any number)
– Exxx
– Fxxx
– ***xx
– ******
- No: Refer to the 9348 Service Information and use the "Running Diagnostic Tests"
procedure to run Diagnostic Test 1. If the test fails, use the 9348 Service Information
to determine the failing items.
- Yes: Use the "Status Codes" section of the 9348 Service Information to determine
the failing items.
or part numbers that need to be replaced.
Analyze hardware problems
263