Memory For 2890 Integrated Xseries Server (Ixs) Card - IBM iSeries Series Hardware Problem Analysis And Isolation

Hide thumbs Also See for iSeries Series:

Table of Contents

Memory for 2890 Integrated xSeries Server (IXS) card: One of the Pentium

(DIMM 0, DIMM 1, DIMM 2, or DIMM 3) may be the failing item. See Type, model, and part number

list for part numbers.

1. At least 1 Pentium memory module is required in positions DIMM 0, DIMM 1, DIMM 2 or DIMM 3.

2. An IXS adapter card IOP (see Type, model, and part number list for part number) is required in the

IOP DIMM position. This IOP memory module is NOT interchangeable with the Pentium memory

module(s) in positions DIMM 0, DIMM 1, DIMM 2 or DIMM 3.

This ends the procedure.

Figure 2. Locations of DIMM 0, DIMM 1, DIMM 2 and DIMM 3 on 2892 Integrated xSeries Server (IXS)

iSeries: iSeries Server 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Hardware Problem Analysis and

memory modules