Analyze Ipl Problems - IBM iSeries Series Hardware Problem Analysis And Isolation

Hide thumbs Also See for iSeries Series:

Table of Contents

Failing area

This ends the procedure.

Analyze IPL problems

For use by authorized service providers.

Use the following table to start analyzing an IPL problem.

Table 1. Analyze IPL problems

You cannot perform an IPL from the system control panel

You cannot perform an IPL at a specified time (no SRC).

You cannot start an IPL from a remote location (no SRC). Go to "Cannot perform IPL from a remote location (no

The IPL did not complete.

The system cannot automatically perform an IPL after a

local power failure occurred.

iSeries: iSeries Server 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Hardware Problem Analysis and Isolation

What you should do:

Go to "Cannot perform IPL from the control panel (no

SRC)" on page 19.

Go to "Cannot perform IPL at a specified time (no SRC)"

SRC)" on page 23.

Go to "System hangs or loops (no SRC)" on page 26.

Go to "Cannot automatically perform an IPL after a power

failure" on page 30.

Intermittent

External noise

on twinaxial

Electromagnetic

interference

(EMI)" on page

Utility power

power units" on

protectors" on

internal code"

installed" on

problems" on