IBM iSeries Series Hardware Problem Analysis And Isolation page 366
Hide thumbs
Also See for iSeries Series:
Table of Contents
Advertisement
v For SRC 3105 or 3116:
– Air moving device (AMD) control card - BB1
– Tower card - CB1
This ends the procedure.
6. Is the SRC 3102?
v No: Continue with the next step.
v Yes: Replace the following FRUs one at a time. Use the FRU locations and failing components
table in the Locations and addresses page for the model or feature code you are working on. The
table will include location, and remove and replace instructions.
– HSL I/O bridge - C08
– Tower card - CB1
This ends the procedure.
7. Is the SRC 3103?
v No: Continue with the next step.
v Yes: Replace the following FRUs one at a time. Use the FRU locations and failing components
table in the Locations and addresses page for the model or feature code you are working on. The
table will include location, and remove and replace instructions.
– For FC 5074, FC 5079, FC 5094, FC 8079, FC 9074, FC 9079, and FC 9094:
- Device board - DB1
- Device board - DB2
- Device board - DB3
- Tower card - CB1
This ends the procedure.
– For FC 5078, FC 0578, and FC 5088, FC 0588:
- Tower card - CB1
This ends the procedure.
8. Is the SRC 3104, 3114, 3118, or 311C?
v No: Continue with the next step.
v Yes: Replace the Tower card - CB1. Use the FRU locations and failing components table in the
Locations and addresses page for the model or feature code you are working on. The table will
include location, and remove and replace instructions.
This ends the procedure.
9. Is the SRC 3106 or 3123?
v No: Continue with the next step.
v Yes: Replace the Network interface controller (NIC) card - M41. Use the FRU locations and failing
components table in the Locations and addresses page for the model or feature code you are
working on. The table will include location, and remove and replace instructions.
This ends the procedure.
10. Is the SRC 3110, 3111, 3112?
v No: Go to step 14 (See page 355).
v Yes: Are you working on an FC 5078, FC 0578, FC 5088, or FC 0588?
– No: Continue with the next step.
– Yes: Replace the Tower card - CB1. Use the FRU locations and failing components table in the
Locations and addresses page for the model or feature code you are working on. The table will
include location, and remove and replace instructions.
This ends the procedure.
11. Is the SRC 3110?
v No: Continue with the next step.
354
iSeries: iSeries Server 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Hardware Problem Analysis and
Isolation
Advertisement
Table of Contents
