Seal - Waist Outer - Front Door - Each; Glass/Glass Cassette Unit - Front Door - Adjust - MG MG6 Series 2011 Service Manual

Body Systems

Seal - Waist Outer - Front Door - Each

Remove
1. Remove exterior door mirror.
Mirror - - - Exterior Exterior - - - Electric
Mirror Mirror Exterior
2. Release clips securing waist seal at rear edge of door.
Lift the waist seal to release the remaining clips.
Caution: Always protect paintwork and glass when
removing trim finishers.
Refit
1. Position waist seal to door and secure with clips.
2. Fit exterior door mirror.
Mirror - - - Exterior Exterior - - - Electric
Mirror Mirror Exterior
Version 2.0
Electric remove remove
Electric remove
Electric Refit Refit
Electric Refit

Glass/Glass Cassette Unit - Front Door - Adjust

Adjust
1. Remove front door plastic sheet.
Plastic Plastic Plastic Sheet Sheet - - - Front Sheet Front Door Front
2. Connect window switch multiplug.
3. Lower glass and loosen glass clamp bolts.
4. Loosen bolts securing window glass cassette.
5. Raise glass, ensuring even alignment to door frame
weather seals.
6. Tighten glass clamps to 6.5–7.5Nm.
7. Tighten window glass cassette bolts to 6.5–7.5Nm.
8. Lower glass and check torque.
Doors
Door Remove Door Remove Remove
792