Service Procedures; Body Control Module (Bcm) - MG MG6 Series 2011 Service Manual

Body Control Module

Service Procedures

Body Control Module (BCM)

Remove
1. Disconnect battery earth lead.
2. Remove glovebox.
Glove Glove Glove box box assembly box assembly - - - Remove assembly
3. Remove 2 clips and 2 screws securing closing panel to
fascia and remove panel.
4. Disconnect BCM multiplugs.
5. Remove 2 bolts securing BCM to BCM bracket, release
from upper lugs and remove BCM.
Refit
1. Fit BCM to upper lugs on BCM bracket and secure with
bolts, and tighten to5-7Nm.
2. Connect multiplugs to BCM.
3. Fit glovebox.
Glove Glove Glove box box assembly box assembly - - - Refit assembly
4. Fit closing panel to fascia and secure with clips and
screws.
5. Connect battery earth lead.
Version 2.0
Remove Remove
Refit Refit
Body Systems
817