Switch - Inertia - Fuel Cut Off - MG MG6 Series 2011 Service Manual

Engine Fuel & Management System
4. Position filler neck to filler cap aperture and fit
grommet.
5. Fit rear wheel arch liner.
Liner Liner - - - rear Liner rear wheel rear wheel arch wheel
6. Refill fuel tank.
7. Fit filler cap.
8. Connect battery earth lead.
Version 2.0
arch - - - each arch each Refit. each Refit. Refit.

Switch - Inertia - Fuel Cut Off

Remove
1. Disconnect battery earth lead.
2. Release the storage box from fascia.
3. Remove 2 bolts securing inertia switch to fascia
support, release switch to access multiplug.
4. Disconnect multiplug from inertia switch and remove
switch.
Refit
1. Connect multiplug to inertia switch.
2. Position inertia switch to body. Fit bolts and tighten
to 8Nm
3. Press top of switch to ensure it is set.
4. Fit storage box to fascia and close.
5. Connect battery earth lead.
Engine
333