MG MG3 Owner's Handbook Manual
  1. Manuals
  2. Brands
  3. MG Manuals
  4. Automobile
  5. MG3
  6. Owner's handbook manual

MG MG3 Owner's Handbook Manual

Hide thumbs Also See for MG3:
Table of Contents

Advertisement

Quick Links

See also: Quick Manual , Owner's Handbook Manual
MG3
Owners Handbook

Advertisement

Table of Contents
loading

Related Manuals for MG MG3

Summary of Contents for MG MG3

  • Page 1 Owners Handbook...
  • Page 2 Printed in July 2015...

  • Page 4: Table Of Contents

    CONTENTS Preface..........................1 Introduction ............................ 1 The Owner's Handbook ................................. 1 Status at Time of Printing ............................... 1 Symbols Used .................................... 1 In an Emergency..................................2 Vehicle Identification Information....................3 Vehicle Identification ................................3 Vehicle Identification Label ..............................4 1 Instruments and Controls ..................... 5 Instruments and Controls Overview....................
  • Page 5 CONTENTS Imperial Message Centre ..............................9 Metric Message Centre ................................. 9 Gear Selection Display ................................10 Vehicle Information Display ..............................10 Vehicle Information In Imperial Message Centre ......................11 Vehicle Information In Metric Message Centre ......................15 Warning Lights and Indicators....................20 Lights and Switches........................
  • Page 6 CONTENTS Steering Column .......................... 35 Steering Column Adjustment............................... 35 Horn............................... 36 Mirrors ............................37 Door Mirrors ..................................37 Interior Rear-view Mirror ..............................39 Sun Visor ............................41 Windows............................42 Power Operated Window Controls ..........................42 Window Operation................................42 Interior Lights ..........................44 Interior Lamp ..................................
  • Page 7 CONTENTS Cup Holder............................ 48 2 Climate Control ......................49 Climate Control ........................... 50 Ventilation....................................50 Heater Controls ................................... 52 Air Conditioning Controls ..............................55 3 Audio System ....................... 59 CD Player (Low Line)......................... 60 Use Instructions ..................................60 CD Player Control Panel ..............................61 Basic Operation..................................
  • Page 8 CONTENTS CD Player Control Panel ..............................71 Steering Wheel Control Button............................72 Basic Operation..................................73 Menu Operation..................................76 FM/MW ..................................... 78 ......................................80 CD Playing ....................................81 USB ......................................82 ® iPod/iPhone .................................... 83 AUX......................................84 Bluetooth ....................................84 Antenna..................................... 86 4 Seats &...
  • Page 9 CONTENTS Seat Belts ....................................92 Seat Belt Pre-tensioners................................ 94 Airbag Supplementary Restraint System (SRS) ............... 95 Airbags....................................... 95 Child Restraints ......................... 103 Child Restraint Instructions ...............................103 5 Starting & Driving ...................... 111 Key..............................112 Introduction ...................................112 Remote Key Battery Removing and Refitting.........................113 Child-Proof Locks ........................
  • Page 10 CONTENTS Economical and Environmental Driving .................. 125 Running-in....................................125 Environment Protection ..............................125 Driving Style...................................125 How to save fuel and extend the life of the vehicle .....................126 Maintenance ...................................127 Catalytic Converter ........................128 Fuel......................................128 Starting ....................................128 Driving.....................................129 Fuel System..........................130 Fuel Requirements................................130 Fuel Filler ....................................131 Fuel Filling ....................................131 Fuel Cut-off Switch................................131...
  • Page 11 CONTENTS Anti-lock Brakes (ABS)................................136 Parking Brake ..................................137 Stability Control System (SCS) and Traction Control (TC) ..........139 Stability Control System (SCS) ............................139 Traction Control (TC).................................139 Switching On and Off................................140 SCS/TC Warning Light ................................140 Stop/Start Intelligent Fuel Saving System ................141 Automatic Shutdown of Engine ............................142 Automatic Engine Start ...............................142 Battery.....................................143...
  • Page 12 CONTENTS Load Space....................................151 Internal Loading..................................151 6 Emergency Information .................... 153 Hazard Warning Devices......................154 Hazard Warning Lights ................................154 Warning Triangle ...................................154 Emergency Starting ........................155 Using Booster Cables ................................155 Starting the Vehicle................................155 Vehicle Recovery......................... 157 Towing Eye ....................................157 Towing for Recovery................................158 Tyre Repair &...
  • Page 13 CONTENTS Fuse ......................................168 Fuse Box ....................................169 Passenger Compartment Fuse Box ..........................169 Engine Compartment Fuse Box ............................172 Bulb Replacement ........................174 Bulb Specification .................................174 Bulb Replacement ................................175 7 Maintenance ....................... 177 Maintenance..........................178 Routine Servicing ..................................178 Bonnet ............................182 Opening the Bonnet................................182 Closing the Bonnet................................182 Warning When the Bonnet is Open ..........................182 Engine Compartment ........................
  • Page 14 CONTENTS Engine Oil ....................................185 Cooling System........................... 187 Coolant Check and Top Up ..............................187 Coolant Specification ................................187 Antifreeze ....................................188 Brakes ............................189 Brake Fluid....................................189 Brake Fluid Specification ..............................190 Power Steering .......................... 191 Power Steering Fluid Check and Top Up ........................191 Power Steering Fluid Specification ..........................192 Battery............................
  • Page 15 CONTENTS Washing Fluid Specification ..............................198 Wiper............................199 Wiper Blade ...................................199 Replacing Front Wiper Blades ............................200 Replacing Rear Wiper Blades ............................200 Tyres............................. 202 Overview ....................................202 New Tyres ....................................202 Directional Tyres...................................202 Tyre Life ....................................202 Tyre Pressures ..................................202 Driving Style...................................203 Wheel Balance..................................203 Wheel Alignment..................................203 Caring for Your Tyres ................................203 Tyre Pressures ..................................203 Valves .......................................204...
  • Page 16 CONTENTS Replacement Tyres ................................205 Wheel Fitment Rotation ..............................205 Snow Chains ..................................205 Cleaning and Vehicle Care......................207 Washing Your Car ................................207 Vehicle Graphics Care .................................209 Cleaning the Interior................................210 8 Technical Data ......................213 Technical Data Dimensions ....................... 214 Weights............................215 Towing Weights ..................................215 Major Parameters of Engine .....................

  • Page 18: Preface

    Always remember that if you have any queries concerning information that must be considered with the operation or specification of your car, your MG great care, in order to reduce the risk of Authorised Repairer will be glad to advise you.

  • Page 19: In An Emergency

    PREFACE In an Emergency IMPORTANT This symbol indicates that parts described must be disposed of by authorised persons or bodies to protect Remember the breakdown safety code the environment. If a breakdown occurs while travelling: Asterisk • Wherever possible, consistent with road safety and traffic conditions, the car should be moved off the An asterisk (*) appearing within the text, identifies features main thoroughfare, preferably into a lay-by.

  • Page 20: Vehicle Identification Information

    Transmission Number Location On a label attached to the upper face of the transmission housing. 1 Vehicle Identification Number (VIN) 2 Engine Number 3 Transmission Number Always quote the Vehicle Identification Number (VIN) when communicating with your MG Authorised Repairer.

  • Page 21: Vehicle Identification Label

    PREFACE Vehicle Identification Label Location of Vehicle Identification Label The vehicle identification label contains the following information. • Type Approval Number • Vehicle Identification Number (VIN) • Gross Vehicle Weight • Gross Train Weight • Max Front Axle Weight • Max Rear Axle Weight •...

  • Page 22: Instruments And Controls

    Instruments and Controls Instruments and Controls Overview 46 Storage Equipment Instrument Pack 48 Cup Holder Message Centre 20 Warning Lights and Indicators 26 Lights and Switches 32 Wipers and Washers 35 Steering Column 36 Horn 37 Mirrors 41 Sun Visor 42 Windows 44 Interior Lights 45 Centre Console Power Socket...

  • Page 23: Instruments And Controls Overview

    INSTRUMENTS AND CONTROLS Instruments and Controls Overview Instruments and Controls （ （ （ RHD） ） ） 1 Front Passenger Airbag 2 Entertainment System 3 Heating and Air Conditioning Control Switch 4 Main Lights Switch/Direction Indicators/Main Beam Switch/Rear Fog Lights 5 Horn 6 Driver Airbag 7 Instrument Pack 8 Wiper/Washer Switch...

  • Page 24: Instrument Pack

    INSTRUMENTS AND CONTROLS Instrument Pack Imperial Instrument Pack Metric Instrument Pack Note: The speedometer in the Imperial Instrument Pack is measured in both MPH and km/h. The speedometer in the Metric Instrument Pack is measured in km/h.

  • Page 25: Tachometer

    INSTRUMENTS AND CONTROLS Tachometer Fuel Gauge Indicates the engine speed (figure 1) in revolutions per The quantity of fuel in the tank is indicated by the number minute (×1000). of segments illuminated. there are eight segments in total (figure 3). When the fuel level is full, all eight segments are IMPORTANT illuminated in white.

  • Page 26: Message Centre

    INSTRUMENTS AND CONTROLS Message Centre Metric Message Centre Imperial Message Centre The message centre is located at the bottom of the instrument pack, and it provides the following information: 1 Gear Selection Display 2 Vehicle Information Display Note: The Imperial Message Centre is measured in imperial units. The Metric Message Centre is measured in metric units.

  • Page 27: Gear Selection Display

    INSTRUMENTS AND CONTROLS Gear Selection Display Vehicle Information Display This segment of the message centre indicates the current gear lever position. When the car is stationary and neutral position is selected, the display will indicate N. When reverse gear is selected, the display will indicate R.

  • Page 28: Vehicle Information In Imperial Message Centre

    INSTRUMENTS AND CONTROLS Vehicle Information In Imperial Message • Average Fuel Consumption Centre • Average Speed • Next Service Odometer • TPMS Reset Shows the total distance that the car has travelled. Repeatedly press the button on the end of the main light switch (indicated by arrow in diagram) for less than 2 seconds, and then the above information will be displayed in cycles.
  • Page 29 INSTRUMENTS AND CONTROLS Ambient Temperature Display automatically reset, trip A and trip B can be reset at any time, so as to record vehicle mileage. Display indicates the ambient air temperature of the air outside the vehicle. Fuel Range to Empty Displays the approximate remaining distance that can be travelled before the vehicle needs refuelling.
  • Page 30 INSTRUMENTS AND CONTROLS Average Fuel Consumption This function is automatic and indicates the average fuel consumption since the last time the trip computer was reset (average consumption is calculated by dividing the distance travelled by the amount of fuel used). consumption value can be reset at any time to begin calculating new consumption values for a particular journey or driving conditions.
  • Page 31 Note: Service Interval Announcement information can only be reset by an MG Authorised Repairer. TPMS Reset Enter ‘TPMS RESET?’ display interface. By pressing and Next Service holding the button for longer than 2 seconds. If the text Shows the service interval announcement symbol, the ‘TPMS RESET √’...

  • Page 32: Vehicle Information In Metric Message Centre

    INSTRUMENTS AND CONTROLS Vehicle Information In Metric Message Centre Odometer Shows the total distance that the car has travelled. Note: The TPMS reset menu will only be made available when the car is stationary, with the hand brake applied and ignition on position II. Trip Distance A and Trip Distance B The display shows the distance travelled since the trip record was last resert.
  • Page 33 INSTRUMENTS AND CONTROLS Ambient Temperature Display automatically reset, trip A and trip B can be reset at any time, so as to record vehicle mileage. Display indicates the ambient temperature of the air outside the vehicle. Fuel Range to Empty Displays the approximate remaining distance that can be travelled before the vehicle needs refuelling.
  • Page 34 INSTRUMENTS AND CONTROLS Average Fuel Consumption This function is automatic and indicates the average fuel consumption since the last time the trip computer was reset (average consumption is calculated by dividing the distance travelled by the amount of fuel used). consumption value can be reset at any time to begin calculating new consumption values for a particular journey or driving conditions.
  • Page 35 Note: Service Interval Announcement information can only be reset by an MG Authorised Repairer. TPMS Reset Enter ‘TPMS RESET?’ display interface. By pressing and Next Service holding the button for longer than 2 seconds. If the text Shows the service interval announcement symbol, the ‘TPMS RESET √’...
  • Page 36 INSTRUMENTS AND CONTROLS Note: The TPMS reset menu will only be made available when the car is stationary, with the hand brake applied and ignition on position II.

  • Page 37: Warning Lights And Indicators

    INSTRUMENTS AND CONTROLS Warning Lights and Indicators Side Lamps - Green Illuminates when the side or headlights are switched on. Direction Indicators - Green The left and right direction indicators are represented by directional arrows located at the top of the instrument display.
  • Page 38 INSTRUMENTS AND CONTROLS Rear Fog Light - Yellow has exceeded 15 MPH (25 km/h), the warning lamp will flash accompanied by an audible warning. The warning will continue until either the seat belt is fastened correctly or Illuminates when the rear fog lights are switched 90 seconds has expired.
  • Page 39 INSTRUMENTS AND CONTROLS ABS - Yellow (5 km/h). If the warning light remains illuminated after the parking brake has been released, a fault with the braking system is indicated. Check the brake fluid level. If the The warning light illuminates as a lamp check light continues to illuminate, stop the car as soon as safety when the ignition is switched on, If the light is illuminates, permits and seek qualified assistance urgently.
  • Page 40 If the SCS system has a fault, this warning light will stay on. Stop the car as soon as safety permits and contact an MG Authorised The warning light is used to indicate the Repairer.
  • Page 41 INSTRUMENTS AND CONTROLS Engine Immobilizer/Key Battery Low - Red lamp check when the ignition is switched on, If the function of the SCS system is off. the warning light will illuminate all the time. The warning light does not illuminate when Traction Control (TC) Warning Off - Yellow the ignition is switched on.
  • Page 42 If the light illuminates during driving, then the cruise control is active and green when the master switch Stop-Start system has detected a fault. Contact an MG is pressed but no cruise speed is active. If a fault is detected, Authorised Repairer for advice.

  • Page 43: Lights And Switches

    INSTRUMENTS AND CONTROLS Lights and Switches Side Lights, Tail Lights, Instrument Pack Light Turn the main light switch to position 1 to switch on the Main Light Switch side, tail and instrument pack lights, the side light indicator will illuminate. If the lights are still switched on when the driver's door is opened and the key is removed, an audible warning will be given.

  • Page 44: Fog Lights Switch

    INSTRUMENTS AND CONTROLS Fog Lights Switch Rear Fog Lights When the ignition switch is at position 2 and the headlights Fog lights should be used only when visibility are switched on, switch the rear fog lights (figure 1) to the is very poor;...

  • Page 45: Direction Indicators /Main Beam Lever

    INSTRUMENTS AND CONTROLS Direction Indicators /Main Beam Lever 4 Push away for main beam Take care not to dazzle oncoming vehicles Direction Indicators when driving using main beam headlights. Move the lever down to indicate a LEFT turn (figure 1), or up to indicate a RIGHT turn (figure 2).

  • Page 46: Hazard Warning Lights

    INSTRUMENTS AND CONTROLS Hazard Warning Lights Follow Me Home (Headlights Delayed OFF) After the vehicle is stopped, turn off the ignition and Hazard warning switch location is dependent upon trim remove key. Momentarily push or pull the indicator lever level. switch and release within 1 minute to activate the dipped beam headlamps.

  • Page 47: Headlight Levelling - Manual Adjustment

    INSTRUMENTS AND CONTROLS Headlight Levelling - Manual Adjustment Vehicles fitted with a standard heater feature the switch in the heater control panel (see picture). Press the button to operate the hazard warning lights, all The angle of the dipped beam is affected by the distribution of the direction indicators will flash together.

  • Page 48: Touring Abroad

    Touring Abroad If your journey takes you to countries where cars are driven on the opposite side of the road to your country it will be necessary to fit headlamp beam deflectors. Contact your MG dealer for further details.

  • Page 49: Wipers And Washers

    INSTRUMENTS AND CONTROLS Wipers and Washers IMPORTANT • Avoid operating the wipers on a dry screen. Front Windscreen Wiper Controls • In freezing or very hot conditions, ensure that the blades are not frozen or stuck to the glass before being operated.

  • Page 50: Front Windscreen Washer

    INSTRUMENTS AND CONTROLS Rear Windscreen Wiper Controls The sensor is able to detect varying amounts of water on the outside of the windscreen. With the wiper control set to intermittent, the variable delay will be adjusted automatically according to the information supplied by the rain sensor.
  • Page 51 INSTRUMENTS AND CONTROLS The rear washer and wiper will work with the ignition switched to auxiliary and ignition on position. It will become isolated during cranking. If the rear wiper switch is turned to intermittent wipe (1), the rear wiper will operate.

  • Page 52: Steering Column

    INSTRUMENTS AND CONTROLS Steering Column To adjust the angle of the steering column to suit your driving position: Steering Column Adjustment 1 Fully release the locking lever. DO NOT attempt to adjust the angle of the 2 Hold the steering wheel in both hands and tilt the steering wheel while the car is in motion.

  • Page 53: Horn

    INSTRUMENTS AND CONTROLS Horn please ensure that you press in this area to avoid any potential conflict with the operation of the airbag. Press the steering wheel pad where arrowed to operate the horn. Note: The vehicle horn switch and the driver's airbag are located in close proximity on the steering wheel.

  • Page 54: Mirrors

    INSTRUMENTS AND CONTROLS Mirrors With the ignition switched on, press left (L) or right (R) switch (1) to select the left or right mirror. The switch Door Mirrors illuminates. Then, press one of the 4 arrows on the round switch (2) to adjust the angle of the door mirror. Note: Objects viewed in exterior mirrors may appear further away than they actually are.
  • Page 55 INSTRUMENTS AND CONTROLS Mirror Glass Manual Adjustment Heating Elements The door mirrors have integral heating elements which disperse ice or mist from the glass. The heating elements operate while the Heated Rear Window is switched on. Note: The heating elements will only work when the engine is running.

  • Page 56: Interior Rear-View Mirror

    INSTRUMENTS AND CONTROLS Interior Rear-view Mirror Mirror Folding Before driving, adjust the body of the mirror by hand to achieve the best possible view to the rear. The manual dipping function of the interior rear-view mirror helps to reduce glare from the headlights of following vehicles at night.
  • Page 57 INSTRUMENTS AND CONTROLS Note: In some circumstances, the view reflected in a ‘dipped’ manual mirror can confuse the driver as to the precise location of following vehicles.

  • Page 58: Sun Visor

    INSTRUMENTS AND CONTROLS Sun Visor The vanity mirror for the driver should only be used when the vehicle is stationary. Pivot the sun visor (Figure 1) downward to access the vanity mirror (Figure 2). Some models require the cover to be lifted to access the mirror.

  • Page 59: Windows

    INSTRUMENTS AND CONTROLS Windows Window Operation Ensure children are kept clear when raising or Power Operated Window Controls lowering a window. Push the switch (1-4) down to lower, and pull the switch up to raise the window. The window will stop moving as soon as the switch is released (unless the ‘One-Touch’...
  • Page 60 INSTRUMENTS AND CONTROLS Note: It is recommended that you ISOLATE the rear window switches when carrying a child. ‘One-Touch’ Down By briefly pressing and then releasing (within half a second) a window switch, the window can be fully opened. Window movement can be stopped at any time by pressing the switch again.

  • Page 61: Interior Lights

    INSTRUMENTS AND CONTROLS Interior Lights Note: Manual operation is active only when the ignition switched is in position 1 or 2 . Interior Lamp Automatic Operation The interior light illumination occurs automatically when the door is opened. The interior light remains illuminated for approximately 30 seconds after the doors are closed.

  • Page 62: Centre Console Power Socket

    INSTRUMENTS AND CONTROLS Centre Console Power Socket The centre console power socket is located on the centre console (as shown above), remove the plug to expose the centre console power socket. Note: The centre console power socket voltage supply is 12 V, and the rated power is 120 w.

  • Page 63: Storage Equipment

    INSTRUMENTS AND CONTROLS Storage Equipment Glovebox Instructions • Please close all storage boxes when the vehicle is running. Leaving these storage boxes open may cause personal injury in the emergency start-off, hard brake and car accident. • Do not place inflammables or disposable cigarette lighters in any storage boxes.

  • Page 64: Storage Box

    INSTRUMENTS AND CONTROLS Storage Box Pull the instrument panel storage box cover downward to close. Instrument Panel Storage Box Front Passenger Lower Storage Box DO NOT put flammable substances or liquids in the instrument panel storage box. Ensure the storage box is fully closed when the car is moving.

  • Page 65: Cup Holder

    INSTRUMENTS AND CONTROLS Cup Holder DO NOT place open cups in the cup holder. When the car is in motion, the hot drinks may spill and cause injuries. Located at the front of the gear lever is the cup holder for user.

  • Page 66: Climate Control

    Climate Control 50 Climate Control...

  • Page 67: Climate Control

    CLIMATE CONTROL Climate Control Ventilation 1 Side vents 2 Windscreen vents 3 Centre vents 4 Front seat feet vents 5 Front side window vents Heating, ventilation and air conditioning system provides fresh or heated air to the interior of the car from the air intake grille in front of the windscreen.
  • Page 68 CLIMATE CONTROL Particle/Pollen Filter Side Vents The particle/pollen filter helps to keep the car interior free from pollen and dust. To remain fully effective, the filter should be replaced at the recommended service interval. Vents Centre Vents Rotate the thumb-wheel down to close or up to open the vents.

  • Page 69: Heater Controls

    CLIMATE CONTROL Heater Controls 5 Air distribution 6 Heated rear screen Control Panel 7 Interior lock unlocking 8 Interior lock locking Blower Rotate the blower control clockwise to increase the blower speed or rotate anti-clockwise to decrease the blower speed. The blower is switched off when the blower speed is 0, and the blower speed increases gradually from 1 to 4.
  • Page 70 CLIMATE CONTROL Air Distribution For 'windscreen'. Directs air to the windscreen Rotate the air distribution, control to select the required vents. air distribution mode . Note: In this mode, a small amount of air will be directed to the side vents. For 'face'.
  • Page 71 CLIMATE CONTROL Air Recirculation Press to operate, the LED in the switch illuminates, the air inside the car is recirculated and the air intake is closed, preventing the entry of traffic fumes. When the engine is off, the air recirculation control flap stays in current position.

  • Page 72: Air Conditioning Controls

    CLIMATE CONTROL Air Conditioning Controls 5 Air recirculation 6 Defrost/Demist Control Panel 7 Air distribution 8 Heated rear screen 9 Interior lock unlocking 10 Interior lock locking 11 Decrease blower speed Blower Press the button to increase blower speed. When the system is switched off, pressing the button operates the system.
  • Page 73 CLIMATE CONTROL Temperature Control 3 When the Air conditioning is switched on, the compressor will turn itself “on” and “off”. Rotating the temperature control clockwise will increase the air temperature. The control display will gradually Power On/Off change to red. When the temperature control is fully increased, the control display will be totally red.
  • Page 74 CLIMATE CONTROL Defrost/Demist For 'feet'. Directs air to the feet vents. With this button pressed, air conditioning Note: In this mode, a small amount of air will be is switched on, the blower is set to maximum speed, directed to the side and windscreen vents. air distribution is set to windscreen.
  • Page 75 CLIMATE CONTROL Air Recirculation With this button pressed, the icon shows in the display, the air inside the car is recirculated and the air intake is closed, preventing the entry of traffic fumes. Press the button again ，the system enters external circulation When the engine is powered off, the air recirculation control door stays in current position.

  • Page 76: Audio System

    Audio System 60 CD Player (Low Line) 70 CD Player (High Line)

  • Page 77: Cd Player * (Low Line)

    3 Do not attempt to play non standard discs, or any played correctly. In such cases, please contact your shape which is not round. Do not use damaged discs MG Authorised Repairer. or place any other material into the CD slot. IMPORTANT 4 The audio system is designed to operate between the Only use the CD player when road conditions permit.

  • Page 78: Cd Player Control Panel

    AUDIO SYSTEM CD Player Control Panel 1 On/Off or Pause/Mute 2 Volume Down 3 Volume Up (Seek Downward) (Seek Upward) 6 CD Slot 7 Preset Button 1 8 Preset Button 2 9 Preset Button 3 10 Preset Button 4 11 Preset Button 5 12 Preset Button 6 13 BAND (Frequency) (CD Eject Button)

  • Page 79: Basic Operation

    AUDIO SYSTEM Basic Operation Select Mode Repeatedly press the SRC button to change the source On/Off Power of the output. The unit will cycle through the following Press the On/Off button to switch on radio system, and options: TUNER, CD (if there is a disc in the CD player), press again to turn off the system.
  • Page 80 AUDIO SYSTEM Menu Operation For each press of MENU button, the mode will cycle In EQ mode, press button or button, and select from through Clock, BASS, TREBLE, BALANCE, FADER, EQ, CLASSIC, ROCK, POPULAR, and OFF. LOUDNESS, AF, REG, CT, EON and TA Volume. LOUDNESS BASS In LOUDNESS mode, press...
  • Page 81 AUDIO SYSTEM Playing Mode Clock Time Setting Press button or button to select CT ON or CT OFF. In CD/USB mode, press MODE button to select the random or repeat playing modes. Note: CT synchronisation (via RDS) will be automatically deactivated if the user makes manual In random mode, press button or button, and select...

  • Page 82: Radio Function

    AUDIO SYSTEM Radio Function Note: 4 seconds after the last operation has been made, the system will enter the current playing mode. Mode Selection Press SRC button to select radio as the source. Band Selection Repeatedly press the BAND button to select FM1, FM2, FMA, MW, MWA frequencies.
  • Page 83 AUDIO SYSTEM Note: If no station can be found, then the search will • Press any number button for more than 2 seconds. The be stopped, and the screen will display ‘NO STATION’. frequencies will be automatically stored. Note: Manual store overwrites any stations which Manual Tuning Mode already stored on the pre-set buttons.

  • Page 84: Cd Playing

    AUDIO SYSTEM CD Playing Fast Forward/Rewind 1 Press and hold button to fast rewind. The Compact Disc (CD) player fitted to your 2 Press and hold button to fast forward. car will only accept one disc at a time. Ejecting CD Loading a CD Press Eject button, the disc will be ejected from the player Make sure that the disc is positioned with the label...

  • Page 85: Usb

    AUDIO SYSTEM USB Playing Press button once to choose the next track to play. USB Connection Press button once, if the playing time exceeds 1 second, A USB connection is situated inside the centre upper the track will be played from the beginning, press the stowage tray located in the fascia.

  • Page 86: Aux

    AUDIO SYSTEM Antenna AUX Input Playing An AUX device connection (3.5 mm jack socket) is located inside the centre upper stowage tray located in the fascia. Insert an auxiliary device via the auxiliary socket, after auxiliary is connected. The antenna is located at the rear of the roof. Avoid bending the antenna.

  • Page 87: Cd Player * (High Line)

    3 Do not attempt to play non standard discs, or any played correctly. In such cases, please contact your shape which is not round. Do not use damaged discs MG Authorised Repairer. or place any other material into the CD slot. IMPORTANT 4 The audio system is designed to operate between the Only use the CD player when road conditions permit.

  • Page 88: Cd Player Control Panel

    AUDIO SYSTEM CD Player Control Panel 1 Volume Up (Seek Downward) 3 Volume Down 4 SEL (Seek Upward) 6 ESC 7 Number Button 9 SRC (Source) or On/Off 10 BAND (Frequency) 11 MODE 12 AUDIO 13 TA (Traffic Announcement) (CD Eject Button) 16 MUTE 17 MENU 18 CD Slot...

  • Page 89: Steering Wheel Control Button

    AUDIO SYSTEM Steering Wheel Control Button (Seek Downward) (Seek Upward) Previous preset in Next preset in current Short current Band Band Press Previous automatically Next automatically search the frequency search the frequency range, looking for range, looking for Radio Long a radio station of a radio station of Press...

  • Page 90: Basic Operation

    AUDIO SYSTEM Basic Operation Select Mode Repeatedly press the SRC button to change the source On/Off Power of the output. The unit will cycle through the following Press the On/Off button to switch on radio system, and options: radio, CD (if there is a disc in the CD player), press again to turn off the system.
  • Page 91 AUDIO SYSTEM Audio Sound Setting FADER Press the AUDIO button to adjust the sound setting, In FADER mode, press button or button to adjust press button or button to access BASS, MIDDLE， the front-rear balance effect (adjustment range: F7 - R7), TREBLE, BALANCE, FADER, EQ, and LOUDNESS.
  • Page 92 AUDIO SYSTEM and time display modes (12HR or 24HR). Press SEL button Note: If there is no folder in source, the random folder to confirm, press SEL button again to return to the menu selection is unavailable. after Clock Settings have been confirmed Folder Mode Press SEL button to access date mode, press the button...

  • Page 93: Menu Operation

    AUDIO SYSTEM Menu Operation When REG is on, the radio can change the frequency in the AF list the station. When REG is off, the radio will tune to Press the MENU button to access the menu mode. Press another station. button or button to select RDS Settings, Bluetooth Settings, Contrast Adjustments, DAB Setting.
  • Page 94 AUDIO SYSTEM Bluetooth Settings Incoming Call volume In the menu mode, select Bluetooth Settings, and press the Sets the call volume. SEL button to enter the Bluetooth Settings menu. Press Contrast Adjustment button or button to select bluetooth function. Press button or button to adjust the contrast, press Bluetooth Activation...

  • Page 95: Fm/Mw

    AUDIO SYSTEM FM/MW Note: If no station exists within the entire band, then the search will be stopped after finishing a cycle, and Mode Selection the screen will display ‘NO STATION’. Press SRC button to select radio. Manual Tuning Mode Band Selection Press and hold either of button or...
  • Page 96 AUDIO SYSTEM • Press any numbered button for more than 2 seconds. Press MODE button to enter the RDS selection screen, The current radio frequency will be automatically stored press the button or button, select RDS TXT display, in the pre-set memory. press SEL to confirm and return to the FM display.

  • Page 97: Dab

    AUDIO SYSTEM In Alphabetical Mode press the seek button select DAB radio stations Alphabetically. Press the BAND button and select DAB mode, there are 3 DAB bands (DAB1, DAB2, DAB3). Pre-set Tuning Mode Station Select Six radio stations can be stored within the audio unit. select button 1-6 to access a stored frequency.

  • Page 98: Cd Playing

    AUDIO SYSTEM CD Playing cycle through the available ensembles, press SEL to confirm selection. Having selected an ensemble, press MODE to The Compact Disc (CD) player fitted to your display a list of stations available on the selected ensemble. car will only accept one disc at a time. Press ESC to return to the previously selected station.

  • Page 99: Usb

    AUDIO SYSTEM Fast Forward/Rewind 1 Press and hold button to fast rewind, once the USB Connection button is released the track will resume normal play. A USB connection is situated inside the centre upper 2 Press and hold button to fast forward, once the stowage tray located in the fascia.

  • Page 100: Ipod/Iphone

    AUDIO SYSTEM ® iPod/iPhone USB Playing Press button once to choose the next track to play. ® iPod/iPhone Connection Press button once, if the playing time exceeds 3 ® Once the iPod/iPhone is inserted into the USB socket， seconds, the track will be played from the beginning, and Track playback will start immediately.

  • Page 101: Aux

    AUX Input Playing Pairing An AUX device connection (3.5 mm jack socket) is located The Bluetooth system device is name tagged "MG3 inside the centre upper stowage tray located in the fascia. CARKIT-******". Insert an auxiliary device via the auxiliary socket, after Use your mobile telephone to search for an available auxiliary is connected, then unit will play the Audio.
  • Page 102 AUDIO SYSTEM When a mobile phone has been successfully paired with Accept/Reject Incoming Call the audio unit. The audio unit screen will display that the When receiving a call, current audio status will be paused, phone is connected. the callers number and name will be displayed, press the If Bluetooth is enabled on the phone and radio unit (the button to access or press button to reject the call.

  • Page 103: Antenna

    AUDIO SYSTEM Antenna Phonebook Press SEL button to access the phone book menu, press button or button to select functions full list or phonebook search. To search the phonebook, press the button or button to search for names or select the first letter, press SEL button to confirm, to enable search name.

  • Page 104: Seats & Restraints

    Seats & Restraints 88 Seats 92 Seat Belts 95 Airbag Supplementary Restraint System (SRS) 103 Child Restraints...

  • Page 105: Seats

    SEATS & RESTRAINTS Seats The driver and front passenger seats should be positioned as far rearward as practical. A properly adjusted seat Correct Seating Position helps reduce the risk of injury from sitting too close to an inflating airbag. To avoid the risk of loss of control and personal injury, DO NOT adjust the seats Ideally the seat should be positioned so that the steering while the car is moving.

  • Page 106: Head Restraints

    SEATS & RESTRAINTS Head Restraints heavy braking, thereby reducing the risk of head and neck injuries. Adjust the head restraint so that the top of Press the button (arrowed) and push the head restraint the head restraint is in line with the top of downwards to lower its position, or lift the head restraint the occupant's head and the back of the to raise its position.

  • Page 107: Manual Front Seat

    SEATS & RESTRAINTS Manual Front Seat Forward/Rearward Adjustment Lift the lever (1), slide the seat into position and release the lever. Make sure the seat is locked in position before driving. Height Adjustment Pull the lever (2) upwards with a pumping action to raise the seat as required.

  • Page 108: Folding The Rear Seats

    SEATS & RESTRAINTS Folding the Rear Seats an accident, or emergency maneuver - where possible, use the seat belts to secure luggage carried on seats. DO NOT carry objects on the rear parcel To increase luggage space, fully lower all head restraints, shelf - they could become dangerous pull up release catches and fold the seat backrest forward.

  • Page 109: Seat Belts

    SEATS & RESTRAINTS Seat Belts IMPORTANT • DO make sure all passengers are securely strapped Seat Belts in at all times - even for the shortest journeys. The airbag supplementary restraint system • ALWAYS adjust seat belts to eliminate any slack in (SRS) is designed to add to the overall the webbing.
  • Page 110 If a seat belt fails any of these tests, contact your Pull the seat belt steadily over the shoulder and across the MG Authorised repairer for inspection at the earliest chest and, ensuring the webbing is not twisted, insert the opportunity.

  • Page 111: Seat Belt Pre-Tensioners

    BE REPLACED. Failure to replace the • The removal or replacement of a pre-tensioner pre-tensioners will reduce the efficiency of must be carried out by MG Motor trained, dealer the car's front restraint systems. technicians. The seat belt pre-tensioners activate in conjunction with •...

  • Page 112: Airbag Supplementary Restraint System (Srs)

    SEATS & RESTRAINTS Airbag Supplementary Restraint The SRS system incorporates front and side airbags and System (SRS) side head impact protection airbags for both the driver and front seat passenger. Airbags The front airbags are located in the centre pad of the steering wheel and in the fascia panel above the glovebox.
  • Page 113 SEATS & RESTRAINTS Airbag Deployment Side airbags and side head impact protection airbags are designed to offer additional protection to the side of the To minimise the risk of accidental injury body facing the impact, if a severe side collision occurs. from inflating airbags, seat belts should be IMPORTANT worn correctly at all times.
  • Page 114 SEATS & RESTRAINTS In the case of a severe frontal collision, both front airbags will be deployed. In the case of a severe side collision, only the side airbag and side head impact protection airbag on the impact side of the vehicle will inflate. However, there may also be impact conditions whereby one set of side and both front airbags deploy at the same time, or where front and side airbags respond separately...
  • Page 115 SEATS & RESTRAINTS Front Seat Side Airbags IMPORTANT Ensure sufficient distance exists between • Obstructions between an airbag and the occupant the driver and front passengers’ torsos and may affect the correct deployment of the airbag. the side of the vehicle to ensure correct Obstructions must not interfere with the airbag deployment of the front side airbags.
  • Page 116 If any of the following symptoms occur, the system should in the event of a front or rear impact. be inspected by your MG Authorised Repairer. In the event of a severe impact on one side of the vehicle, • The warning light fails to illuminate when the ignition the side head impact protection airbags will be deployed switch is in position 2.
  • Page 117 SEATS & RESTRAINTS Disabling the Passenger Airbag Where fitted the airbag disable switch is located in the centre console. To disable the passenger airbag, insert the The Passenger Airbag should only be disabled key blade into the switch. when a rear facing child seat is fitted to the front passenger seat.
  • Page 118 IMPORTANT • The removal or replacement of an airbag module must be carried out by an MG Authorised Repairer. • After 10 years from the initial date of registration The warning light is located in the interior light assembly.
  • Page 119 SEATS & RESTRAINTS Disposing of the Vehicle When selling your vehicle, you must make sure that the new owner knows that the vehicle is equipped with airbags, and the date of the airbag system replacement. Uninflated airbags are potentially very dangerous and must be safely deployed in a controlled environment by qualified personnel, before a vehicle is scrapped.

  • Page 120: Child Restraints

    SEATS & RESTRAINTS Failure to follow the advice could result in Child Restraints serious injury or even death of the child. Children must be secured in the vehicle in a child restraint system appropriate for weight and size. DO NOT put the child on the lap or in arms when sitting in any seat.
  • Page 121 SEATS & RESTRAINTS Children are more vulnerable than adults to an inflating airbag manual deactivation switch is not fitted to the airbag. It is recommended that children below the age of vehicle. 12 years old are seated in the rear seats. Note: Front passenger seat must be positioned fully Infants less than 2 years old should be restrained in an infant rearwards for installation of rear facing child restraint...
  • Page 122 SEATS & RESTRAINTS IMPORTANT • It is recommended that a child restraint system that complies with UN ECE R44 standard is fitted in this vehicle. Check markings on the child restraint system. • It is recommended that children should always be seated in the rear of the vehicle in a child restraint system.
  • Page 123 SEATS & RESTRAINTS Approved Child Restraint Positions (for Non-ISOFIX Child Restraints) If vehicle is not equipped with passenger airbag disable switch, rearward facing child restraints MUST NOT be installed on the front passenger seat. Seating Positions Front Passenger With Passenger Weight Group Without Airbag Disable...
  • Page 124 SEATS & RESTRAINTS Approved Child Restraint Positions (for ISOFIX Child restraints) ISOFIX Positions Weight Group Size Class Fixture Rear Outboard ISO/L1 Carrycot ISO/L2 0 (up to 10 kg) ISO/R1 ISO/R1 0+ (up to 13 kg) ISO/R2 ISO/R3 ISO/R2 ISO/R3 I (9 to 18 kg) ISO/F2 IUF, IL ISO/F2X...
  • Page 125 SEATS & RESTRAINTS ISOFIX Positions Weight Group Size Class Fixture Rear Outboard III (22 to 36 kg) IUF = Suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this mass group. IL = Suitable for particular ISOFIX child restraint systems (CRS) given in the attached list. These ISOFIX CRS are those of the ‘specific vehicle’, ‘restricted’...
  • Page 126 SEATS & RESTRAINTS List of Approved Child Restraints Systems Weight Group Size class CRS name Fixture Type Category Britax Baby Safe Plus with 0+ (up to 13 kg) ISO/R1 Rear Facing Semi-universal support seat frame Britax Duo Plus with I (9 to 18 kg) ISO/F2X Forward Facing Universal...
  • Page 127 SEATS & RESTRAINTS • Fasten the Top-tether of the child restraint system to the anchor at the rear of the rear passenger seat backrest. Note: When using seat mounting, universally approved child restraint systems, Top-tether must be used. Note: Please refer to the child restraint system manufacturer's instructions for details.

  • Page 128: Starting & Driving

    Starting & Driving 112 Key 147 Parking Aid - PDC (Parking Distance Control) 115 Child-Proof Locks 149 Tyre Pressure Monitoring System 116 Alarm System (TPMS) 121 Starting and Driving 151 Load Carrying 125 Economical and Environmental Driving 128 Catalytic Converter 130 Fuel System 133 Manual Transmission 134 Brake System...

  • Page 129: Key

    STARTING & DRIVING The keys supplied with your car are programmed to your security system. If a key has not been programmed Introduction according to your car, it cannot start the engine. The remote key only works within a certain range. Its work Please keep the spare key in a safe place - scope is sometimes influenced by the key battery condition, not in the car!

  • Page 130: Remote Key Battery Removing And Refitting

    STARTING & DRIVING If your key is lost/stolen or broken, a replacement can only be obtained from an MG Authorised Repairer. The lost/stolen key can be deactivated. If the lost key is found, MG Authorised Repairers can reactivate it. Note: Replacement keys are only available via MG Authorised Repairer.
  • Page 131 STARTING & DRIVING Note: Finger marks will adversely affect battery life; if possible, avoid touching the flat surfaces of the battery when replacing the new one. 5 Fit the new battery, ensuring that correct polarity is maintained. Meanwhile, align the waterproof gasket to the mounting holes, make sure that it is fitted correctly.

  • Page 132: Child-Proof Locks

    STARTING & DRIVING Child-Proof Locks With the child-proof locks engaged, the rear doors cannot be opened from inside the car, but can be opened from NEVER leave children unsupervised in the outside the car. car. Lock or Unlock the Child-proof Locks •...

  • Page 133: Alarm System

    STARTING & DRIVING Alarm System Locking and Unlocking Remote Key Engine Immobilisation Engine immobilisation is an important aspect of the security system, it is designed to safeguard the vehicle from theft, by preventing the engine from being started unless the GENUINE key is inserted into the ignition switch.
  • Page 134 STARTING & DRIVING Locking Mislock Using the Remote Key If the driver's door is not fully closed when the remote key lock button is pressed or the mechanical key is used for 1 Close the doors and tailgate. locking, none of the doors will be locked, and an audible 2 Press the lock button once.
  • Page 135 STARTING & DRIVING Lock Status Indicator is closed fully but any other door or tailgate is not closed when the interior lock switch locks the door, the indicator will flash. The indicator is used to indicate the lock status. When the remote key or mechanical key locks the door, the indicator will flash quickly for 10 seconds and then slow.
  • Page 136 STARTING & DRIVING Unlocking Interior Lock Switch Using the Remote Key Press the unlock button once to unlock all doors. The direction indicators flash once. Using the Mechanical Key 1 Insert the mechanical key into the driver's door lock and turn counterclockwise once to unlock all doors. 2 The direction indicators flash once.
  • Page 137 STARTING & DRIVING If the driver's door is not closed, the interior locking switch Note: If the car is locked using the key or remote key will not function. the doors will be 'super-locked'. Whilst in this locked condition the door handles are rendered inoperative. If any other door or tailgate is not closed when the interior locking switch is pressed, the lock status indicator will flash, Speed Related Locking...

  • Page 138: Starting And Driving

    STARTING & DRIVING Starting and Driving • To achieve the steering lock , when key removed. Ⅰ Ⅰ Ⅰ Position (ACC) Docking Station • Turn off the ignition, the key cannot be removed. • Some electrical equipment can be operated, such as DO NOT remove or touch the key while the wipers, electric windows, mirrors .

  • Page 139: Starting The Engine

    STARTING & DRIVING Starting the Engine steering wheel left and right while turning the key to unlock the steering wheel. NEVER start or leave the engine running in an unventilated building - exhaust gases are poisonous and contain carbon monoxide, which can cause unconsciousness and may even be fatal.

  • Page 140: Stopping The Engine

    STARTING & DRIVING soon as the engine has started, the ignition will return IMPORTANT to position Ⅱ automatically. • Do not leave the ignition switch in position Ⅰ or Note: Continued use of the starter will not only position Ⅱ when the engine is not running, otherwise discharge the battery, but may damage the starter it may leads to battery discharge .
  • Page 141 STARTING & DRIVING 4 Turn the key to Position 0 , remove the key from the switch. Note: After strenuous towing or driving at high speed (particularly in hot weather), it is suggested to allow the engine to idle for a few minutes before switching off, which enables the cooling system to work continuously to lower the engine temperature.

  • Page 142: Economical And Environmental Driving

    STARTING & DRIVING Economical and Environmental Driving Driving Style The way in which you drive your car has a significant Running-in bearing on environmental pollution, as well as affecting the The engine, transmission, brakes and tyres need time to amount of fuel you use. ‘bed-in’...

  • Page 143: How To Save Fuel And Extend The Life Of The Vehicle

    STARTING & DRIVING Drive smoothly How to save fuel and extend the life of the vehicle Anticipating obstructions and slowing down well in The following are some suggestions on saving fuel and advance, avoids the need for unnecessary acceleration and extending the life of the vehicles.

  • Page 144: Maintenance

    • Maintain the vehicle in accordance with MG recommendations. Dirty air filters, oil etc., will reduce Do not carry unnecessary loads the engine's performance and raise fuel consumption.

  • Page 145: Catalytic Converter

    When driving, you should pay attention to the following points: • Do not continue to operate the starter after a few failed attempts, seek MG Authorised Repairer. • Do not operate the starter if an engine misfire is suspected and do not attempt to clear a misfire by...

  • Page 146: Driving

    • Do not stop the engine when the car is in motion with a gear selected. • Seek MG Authorised Repairer if you think your car oil consumption is abnormal. • If a misfire is suspected, or the car lacks power while...

  • Page 147: Fuel System

    STARTING & DRIVING Fuel System Safety on the Forecourt Vehicle fuel gases are highly flammable Fuel Requirements and, in confined spaces, are also extremely Use only the recommended fuel which meets explosive. national standard! Serious damage to the catalytic converter will occur if the wrong Always take care when refueling: fuel is used.

  • Page 148: Fuel Filler

    After refueling, if the engine runs unevenly, switch off and The fuel filler flap is located on the rear right-hand wing. seek an MG Authorised Repairer before attempting to Pull the fuel filler flap release lever under the driver side restart the engine.
  • Page 149 STARTING & DRIVING The switch must be reset before the engine can be started. Reset the switch by pressing the top of the switch (arrowed in illustration). In the event of a collision or sudden impact, the fuel cut-off inertia switch automatically isolates the fuel supply to the engine, unlocks the doors, flashes the hazard lights and turns the interior lights on.

  • Page 150: Manual Transmission

    STARTING & DRIVING Manual Transmission Precautions When Driving: • When switching between the forward gears and reverse Gear Lever gear, ensure the vehicle is completely stationary, wait for a moment and then fully press the clutch pedal to complete the gear shift. •...

  • Page 151: Brake System

    DO NOT continue driving - seek MG Authorised Repairer assistance. Remember that regular servicing is vital to ensure that all the brake components are examined for wear at the...
  • Page 152 If this light illuminates, there is a fault with the braking system, and EBD may not be available. If this occurs, stop the car as soon as safety permits and seek MG Authorised Repairer assistance immediately. DO NOT drive the car with parking brake/brake system light illuminated.

  • Page 153: Anti-Lock Brakes (Abs)

    STARTING & DRIVING Anti-lock Brakes (ABS) come into operation. This will be recognizable by a rapid pulsation felt through the brake pedal. cannot overcome physical limitations of stopping the car in too short Braking in an Emergency a distance, cornering at too high a speed, or DO NOT pump the brake pedal at any time;...

  • Page 154: Parking Brake

    STARTING & DRIVING Parking Brake No matter how hard you brake, you should be able to continue steering the vehicle as normal. DO NOT drive with the parking brake applied, or apply the parking brake while ABS Warning Light the car is in motion. This could result in loss See the warning light ‘ABS ' in 'Instruments and Controls'.
  • Page 155 STARTING & DRIVING The parking brake operates on the rear wheels only. To apply the parking brake, pull the lever up. Always apply the parking brake fully whenever you park the car. To release, pull the lever up slightly, press the button (arrowed in illustration) and fully lower the lever.

  • Page 156: Stability Control System (Scs) And Traction Control (Tc)

    STARTING & DRIVING Stability Control System (SCS) and are spinning, the system will reduce engine speed in order Traction Control (TC) to regulate wheel rotation until traction is regained. Note: The individual wheel braking feature of the Stability Control System (SCS) traction control system will not operate at road SCS is designed to assist the driver in control of driving speeds above 62 MPH (100 km/h).

  • Page 157: Switching On And Off

    STARTING & DRIVING Switching On and Off Note: Pressing the TC/SCS disable switch for more than 10 seconds will be considered as a mis-operation. Both systems will remain disabled until the switch is pressed for a second time or the key is removed.

  • Page 158: Stop/Start Intelligent Fuel Saving System

    STARTING & DRIVING Stop/Start Intelligent Fuel Saving Engine Stop/Start has been incorporated into vehicles in System an effort to reduce emissions. As the name suggests the system will allow the engine to be switched off when engine power is not required and then automatically be restarted when it is.

  • Page 159: Automatic Shutdown Of Engine

    STARTING & DRIVING Automatic Shutdown of Engine • Driver's door and bonnet are closed. Although the engine will not be running when • Driver's seat belt is fastened. the vehicle stops and the stop start function Stop Start Intelligent Fuel Saving will be disabled under the cuts in, certain actions could render the following conditions: vehicle dangerous:...

  • Page 160: Battery

    • Driver's seat belt unfastened. voltage reduction, not a fault. if the M IL stays on, • Driver's door is opened. seek advice from an MG Authorised Repairer. • Bonnet is opened. If the vehicle is stalled when under automatic stop start...

  • Page 161: Stop/Start Intelligent Fuel Saving System Failure

    The Stop/Start Intelligent Fuel Saving System can be guidelines will effect battery performance and effected by faults within other vehicle systems - in the automatic Stop/Start control: event of failure contact an Authorised MG Repairer. 1 After power interruptions (battery disconnection) Serious Battery Capacity Loss, Starter...

  • Page 162: Cruise Control System

    STARTING & DRIVING Cruise Control System Cruise control enables the driver to maintain a constant road speed without using the accelerator pedal. This Cruise Control System is particularly useful for motorway cruising, or for any journey where a constant speed can be maintained for a lengthy period.
  • Page 163 STARTING & DRIVING figure), the indicator lamp in the instrument pack in increments of 1mph/1km/h, then the vehicle will illuminates and the cruise system is activated. accelerate/decelerate to the new set speed. Press and hold the SET +/SET - switch, the vehicle will keep 2 Press the speed set switch SET +/SET -( 2 and 4 shown accelerating/decelerating until the switch is released.

  • Page 164: Parking Aid - Pdc (Parking Distance Control)

    STARTING & DRIVING Parking Aid - PDC (Parking Distance Three ultrasonic sensors, situated in the rear bumper, scan Control) an area behind the car searching for obstructions. If an obstruction is detected, the system calculates its distance Parking Aid (Ultrasonic Parking Ranging from the rear of the car and communicates this information Warning Devices) to the driver by sound warning chimes.
  • Page 165 If the obstruction exists in the 'blind area' no warning chimes will be heard. Note: if a longer, higher pitched sound is emitted for 3 seconds when reverse gear is selected this indicates a fault in the system. In this case seek assistance from your MG Authorised Repairer.

  • Page 166: Tyre Pressure Monitoring System (Tpms)

    STARTING & DRIVING Tyre Pressure Monitoring System System Malfunction (TPMS) This system is self-monitoring, the TPMS warning light on the instrument panel will flash if a fault is detected. The TPMS is not a substitute for checking tyre condition and pressures. The following conditions will not manifest themselves as a fault: •...
  • Page 167 If successful, ‘TPMS RESET√’ will appear. If unsuccessful, ‘TPMS RESET×’ will appear, consult your MG Authorised Repairer. Note: Before carrying out a TPMS reset inspect the tyres for signs of damage and ensure the tyres are inflated to the recommended pressures.

  • Page 168: Load Carrying

    STARTING & DRIVING Load Carrying so as to avoid the cargo shift in the event of an accident or sudden stop. DO NOT exceed the gross vehicle weight or the permitted front and rear axle loads. Drive carefully and avoid emergency braking or maneuvers. Failure may result in vehicle damage or Driving with the tailgate open is very dangerous.
  • Page 169 STARTING & DRIVING Folding the rear seats can increase luggage space, refer to ‘Rear Seat’ described in the ‘Seats and Restraints’ chapter. When cargo is loaded in the vehicle, place it at a position as low as possible and ensure that it is tightly secured, so as to avoid personal injury caused by cargo movement.

  • Page 170: Emergency Information

    Emergency Information 154 Hazard Warning Devices 155 Emergency Starting 157 Vehicle Recovery 160 Tyre Repair & Wheel Replacement 168 Fuse Replacement 174 Bulb Replacement...

  • Page 171: Hazard Warning Devices

    EMERGENCY INFORMATION Hazard Warning Devices Warning Triangle Hazard Warning Lights The Hazard Warning switch is either located in the centre console or heater control panel, dependant upon trim level, for information about the Hazard Warning Lights refers to the "Lights and Switches " of the "Instruments and Controls"...

  • Page 172: Emergency Starting

    EMERGENCY INFORMATION Emergency Starting Starting the Vehicle Ensure that each booster cable connection is Using Booster Cables securely made. There must be no risk of the clips accidentally slipping from the battery NEVER start the engine by pushing or towing. terminals (as a result of engine vibration, for example), this could cause sparking, which could lead to fire or explosion.
  • Page 173 EMERGENCY INFORMATION Remove the ignition key and switch off ALL electrical 3 Now start the engine of the vehicle with the equipment of BOTH vehicles, then follow the instructions discharged battery (DO NOT crank the engine for below: more than seconds).

  • Page 174: Vehicle Recovery

    EMERGENCY INFORMATION Vehicle Recovery Towing Eye DO NOT use a tow rope that is twisted - any unwinding force could unscrew the front towing eye. Your car is equipped with a removable towing eye at the To fit the towing eye, remove the small cover set into the front, and with a fixed towing eye at the rear.

  • Page 175: Towing For Recovery

    EMERGENCY INFORMATION Towing for Recovery Note: The towing eye cover may be secured to the bumper by a plastic cord. If your car needs to be towed, most qualified recovery Both towing points are intended for use by qualified specialists will use wheel lift equipment to suspend the recovery specialists to assist in the recovery of your car front wheels, while the rear wheels remain on the ground.
  • Page 176 EMERGENCY INFORMATION While Being Towed: Fit the lashing straps (3) around the wheels and secure to the trailer. Tighten the straps until the car is securely held. The towing distance should not exceed 30 miles (48 km). While towing for recovery, the towing vehicle should never exceed 30 mph (48 km/h) Without the engine running, greater effort will be required...

  • Page 177: Tyre Repair & Wheel Replacement

    EMERGENCY INFORMATION Tyre repair sealant Tyre Repair & Wheel Replacement Locking wheel bolt adapter Tool Identification Electric air compressor Wheel nut cover removal tool Towing hook...

  • Page 178: Tyre Repair

    EMERGENCY INFORMATION Tyre Repair valve. Ensure that the power switch of the Electric air compressor is switched off (i.e., press “O”), then 1 Remove the sticker on the Tyre Sealant Bottle and insert the plug from the compressor into the centre attach it to the steering wheel to remind the driver console power socket.
  • Page 179 • If the tyre pressure has dropped to less than 0.8 bar damaged and you should seek assistance from the (11.6 psi), do not continue driving, seek assistance MG Authorised Repairer. instead. Note: Consecutive operation of Electric air •...
  • Page 180 (B). At the earliest opportunity get the tyre replaced by an Authorised MG Repairer or tyre specialist and replace the used tyre sealant bottle with an MG approved sealant. • If the pressure has not dropped after the second 10 minutes drive, continue.

  • Page 181: Accessing The Spare Wheel And Tools

    EMERGENCY INFORMATION Accessing the Spare Wheel and Tools Tool Identification To access the spare wheel and tools: 1 Wheel nut wrench. 1 Use the lifting strap to raise the luggage carpet. (A) 2 Jack 2 Remove the tool tray. (B) 3 Front towing eye.

  • Page 182: Changing A Wheel

    EMERGENCY INFORMATION Changing a Wheel Positioning the Jack NEVER work beneath the car with the jack If possible, choose a safe place to stop away from the main as the only means of support. The jack is thoroughfare. Always ask your passengers to get out of the designed for wheel changing only! car and wait in a safe area away from other traffic.
  • Page 183 EMERGENCY INFORMATION Avoid accidental contact with any underbody Note: Depending on the style of wheels fitted it parts, especially exhaust system may be necessary to remove wheel nut covers, components. centre cap or wheel trim. Use the special tool located within the tool kit to remove the relevant Position the jack on firm level ground under the jacking trim type.
  • Page 184 7 Finally, return the tools to the tool tray and the wheel (face down) to the well in the loadspace floor Note: Recheck the wheel nut torque after initial tightening. Note: Consult your MG Authorised Repairer or tyre specialist for a replacement tyre, as soon as possible.

  • Page 185: Fuse Replacement

    Check a suspect fuse by removing it from the fuse box and looking for a break in the wire inside the fuse. We suggest that take some spare fuses for replacement. Spare fuses are available from MG Authorised Repairers. IMPORTANT • NEVER attempt to repair a blown fuse. ALWAYS replace a fuse with one of the same rating.

  • Page 186: Fuse Box

    EMERGENCY INFORMATION Fuse Box Passenger Compartment Fuse Box There are two fuse boxes in the vehicle: • Passenger Compartment Fuse Box（below the glove box at the front passenger side）. • Engine Compartment Fuse Box（at the left side of the Engine Compartment）. Check or Replace a Fuse 1 Switch off the ignition switch and all electrical equipment, disconnect the battery negative cable.
  • Page 187 EMERGENCY INFORMATION Fuse Rating Function 4 Replace the blown fuse with a same rating. Inertia Switch Fuse Specification Left Position Lamp, Switch Rating Fuse Function Illumination, Left Tail Lamp Rear Wiper Relay, Rear Washer Front Interior/Map Lamp Relay (LHD) Rear License Plate Lamp, Right Tail Centre Console Power Socket Lamp, Switch Illumination, Right Diagnostic Socket...
  • Page 188 EMERGENCY INFORMATION Rating Rating Fuse Function Fuse Function Left Rear Window Lift Switch Right Brake Lamp Reserve Fuse Right Rear Window Lift Switch Reserve Fuse ECM, BCM Reserve Fuse Passenger Window Lift Switch Reserve Fuse Rear Screen Heating Driver Door Combination Switch Exterior Rear View Mirror Heating In Car Entertainment Air Condition...

  • Page 189: Engine Compartment Fuse Box

    EMERGENCY INFORMATION Engine Compartment Fuse Box Fuse Specification Fuse Rating Function Right Front Low Beam Lamp Post-Oxygen Sensor, Inlet Cam Solenoid, Exhaust Cam Solenoid Left Front Low Beam Lamp Air Condition Compressor Clutch Cooling Fan Relay, Purge Control Valve, Air Condition Compressor Check or Replace a Fuse Clutch Relay, Fuel Pump Relay, Stop 1 Switch off the ignition switch and all electrical...
  • Page 190 EMERGENCY INFORMATION Fuse Rating Function Ignition Switch Right Front High Beam Lamp, IPK Common Unlock and Lock Relays Illumination DC/DC Converter Left Front High Beam Lamp FL10 Horn Relay, Washer Pump Relay Ignition Coils, Injectors, ECM FL11 Blower Motor, Air Conditioning FL12 Dipped Beam Relay Alternator, Passenger...

  • Page 191: Bulb Replacement

    EMERGENCY INFORMATION Bulb Replacement Bulb Specification Lamp Bulb Specifications Lamp Bulb Specifications Headlamp High/Low Beam H4 60/55W License Plate Lamps W5W 5W Side Light W5W 5W Interior Lamp C10W 10W Front Direction Indicators PY21W 21W Rear Direction Indicators P21W 21W Side Repeater (In Mirror) WY5W 5W Load Space Lamp...

  • Page 192: Bulb Replacement

    Insert a small flat-bladed screwdriver into the indent on here), for other bulbs not listed and to be replaced, ask an one of the narrow sides of the lens and carefully remove MG Authorised Repairer for help. the unit from its location.
  • Page 193 EMERGENCY INFORMATION Licence Plate Lights Interior Lamp 1 Insert a small flat-bladed screwdriver into the narrow gap at one side of the license plate light, pry slightly and remove the lens. 1 Use a flat-blade screwdriver to pry the front end of the lens, and remove the lens.

  • Page 194: Maintenance

    Maintenance 178 Maintenance 182 Bonnet 183 Engine Compartment 185 Engine 187 Cooling System 189 Brakes 191 Power Steering 193 Battery 197 Washers 199 Wiper 202 Tyres 207 Cleaning and Vehicle Care...

  • Page 195: Maintenance

    The relevant service should irrespective of the distance the car has travelled. Your MG Authorised Repairer will replace the brake fluid at the be carried as soon as the distance display shows zero. service nearest to the conclusion of each two year period.
  • Page 196 Your MG Authorised Repairer will without delay. For further information, refer replace the coolant at the service nearest to the conclusion to an MG Authorised Repairer.
  • Page 197 If you need to carry out special maintenance operations, ignition. refer to Parts and Warranty Statement on the MG • NEVER leave the engine running in an unventilated area Distributors website or contact your MG authorised - exhaust gases are poisonous and extremely dangerous.
  • Page 198 MAINTENANCE • Ensure sparks and naked lights are kept away from the Used engine oil should be disposed of correctly. Incorrect engine compartment. disposal can cause a threat to the environment. • Wear protective clothing, including, where practicable, gloves made from an impervious material. •...

  • Page 199: Bonnet

    MAINTENANCE Bonnet 2 Push the safety catch lever left to release the safety catch (B). Opening the Bonnet 3 Raise the bonnet and then fit the support stay into the cut out in the underside of the bonnet firmly. DO NOT drive when the bonnet is retained only by the safety catch.

  • Page 200: Engine Compartment

    MAINTENANCE Engine Compartment Engine Compartment (LHD) While working in the engine compartment, always observe the safety precautions listed under "Safety in the Garage", refer to "Maintenance" in "Service and Maintenance" section. 1 Power steering reservoir (black cap) 2 Engine oil filler (yellow cap) 3 Engine oil dipstick (yellow) 4 Brake reservoir (yellow cap) 5 Cooling system expansion tank...

  • Page 201: Engine Compartment (Rhd)

    MAINTENANCE Engine Compartment (RHD) While working in the engine compartment, always observe the safety precautions listed under "Safety in the Garage", refer to "Maintenance" in "Service and Maintenance" section. 1 Power steering reservoir (black cap) 2 Brake reservoir (yellow cap) 3 Engine oil filler (yellow cap) 4 Engine oil dipstick (yellow) 5 Cooling system expansion tank...

  • Page 202: Engine

    MAINTENANCE Engine Engine Oil Level Check and Top Up Driving the car with the engine oil level Engine Oil ABOVE the upper mark, or BELOW the lower mark on the dipstick, will damage the engine. ACEA Specification Use engine oil meeting ACEA specification A1/B1, to Take care to avoid spilling engine oil onto a ensure optimum protection for your engine, alternatively hot engine –...
  • Page 203 MAINTENANCE Check the oil level weekly and top up with oil if necessary. Ideally the oil level should be checked with the engine cold and the car resting on level ground. However, if the car is in use and the engine is already warm, wait for at least five minutes after switching off before checking the level.

  • Page 204: Cooling System

    - escaping steam or If the coolant level falls appreciably during a short period, water could cause serious injury. and a leak is suspected, arrange for MG Authorised Repairer to examine the car. Coolant Specification Please use the coolant (mix of water and antifreeze) which is recommended and certified by the manufacturer.

  • Page 205: Antifreeze

    MAINTENANCE Antifreeze Antifreeze is poisonous and can be fatal if swallowed - keep containers sealed and out of the reach of children. If accidental consumption is suspected, seek medical attention immediately. Prevent antifreeze coming into contact with the skin or eyes. If this occurs, rinse immediately with plenty of water.

  • Page 206: Brakes

    MAINTENANCE Brakes Brake Fluid Brake fluid is highly toxic - keep containers Prevent brake fluid coming into contact with the sealed and out of the reach of children. skin or eyes. If this occurs, rinse immediately If accidental consumption of brake fluid is with plenty of water.

  • Page 207: Brake Fluid Specification

    MAINTENANCE The brake fluid level should be checked weekly when the system is cold and with the car on level ground. The fluid level can be seen through the reservoir neck and should be maintained as close to the ‘MAX' mark as possible.

  • Page 208: Power Steering

    MAINTENANCE Power Steering between the upper and lower marks on the dipstick (see illustration). Power Steering Fluid Check and Top Up Note: Power steering fluid will damage painted Power steering fluid is highly toxic. Keep surfaces. Soak up any spillage with an absorbent cloth containers sealed and out of the reach immediately and wash the area with a mixture of car of children.

  • Page 209: Power Steering Fluid Specification

    MAINTENANCE IMPORTANT Take care not to spill power steering fluid on to a hot engine - a fire may result. Power Steering Fluid Specification Use the power steering fluid which is recommended and certified by the manufacturer. Please refer to ‘Recommended Fluids and Capacities’...

  • Page 210: Battery

    NEVER run the engine with the battery disconnected, or disconnect the battery while the engine is running. If a battery requires replacement contact an MG Authorised Repairer. Only fit a replacement battery of the To access the battery, raise the bonnet, release the fixings same type and specification as the original to maintain the and move the top of the battery cover aside.

  • Page 211: Battery Charging

    • If the terminal is broken, DO NOT charge the battery It should be recycled by a professional company. Please and replace it after finding the reason. consult an MG Authorised Repairer more details. • DO NOT attempt to charge a ‘bulging' or ‘distorted' battery.

  • Page 212: Battery Maintenance

    MAINTENANCE Charging Notes: • Only suitable battery chargers can be used - please consult an MG Authorised Repairer for details. • Always wear safety glasses when connecting or disconnecting a battery charger. • During the charging process the battery temperature MUST NOT exceed 40ºC.
  • Page 213 MAINTENANCE Failure to adhere to this will inhibit the Stop/Start functionality.

  • Page 214: Washers

    MAINTENANCE Washers Check the reservoir level every week. Note: DO NOT use an anti-freeze or vinegar/water Windscreen Washer Check and Top Up solution in the washer reservoir—anti-freeze will Some screenwash products are flammable. damage paintwork while vinegar will damage the DO NOT allow screenwash to come into windscreen washer pump.

  • Page 215: Washer Nozzles

    MAINTENANCE Washer Nozzles Operate the washer periodically to check if the windshield washer nozzles are clean and they are in the correct direction. The windshield washer nozzles are configured during the production, so generally there is no need for adjustments. But, if necessary, you may insert a needle into the nozzle hole, and locate the nozzle by prying it gently, enable the washing fluid spraying directly in the center of the...

  • Page 216: Wiper

    MAINTENANCE Wiper Wiper Blade IMPORTANT • Grease, silicon and petrol based products impair the blade's wiping capability. Wash the wiper blades in warm soapy water and periodically check their condition. • Clean the windscreen frequently, do not use wipers to remove stubborn or ingrained dirt, it will reduce their effect and their life span.

  • Page 217: Replacing Front Wiper Blades

    MAINTENANCE Replacing Front Wiper Blades 6 Check that the blade is fitted correctly to the arm before positioning on the windscreen. Replacing Rear Wiper Blades 1 Lift the wiper arm away from the windscreen. 2 Squeeze the locating tags to both sides as arrowed and pivot the blade away from the wiper arm.
  • Page 218 MAINTENANCE 4 Locate the tip of the new wiper blade in the slot in the wiper arm. 5 Pivot the wiper blade towards the arm until the locating tags engage. 6 Check that the blade is fitted correctly to the arm before positioning on the tail gate.

  • Page 219: Tyres

    If abnormal vibrations or handling is experienced, or you think tyre or rim damage has occurred Tyre Pressures please contact an MG Autorised Repairer. Incorrect tyre pressures can result in poor driving characteristics and a shortened tyre life. Tyre pressures...

  • Page 220: Driving Style

    Incorrect wheel alignment can cause excessive tyre wear pressure must be checked. and affect vehicle safety. If the tyres show signs of abnormal wear seek advice from an MG Authorised repairer. Check the pressures (including the spare wheel) at least every month, when the tyres are cold.

  • Page 221: Valves

    MAINTENANCE Tyre Wear Indicators air out of the tyres in order to match the recommended pressures (cold). Tyres fitted as original equipment have wear indicators moulded into the tread pattern at several points around Valves the circumference. Keep the valve caps screwed down firmly - they prevent dirt from entering the valve.

  • Page 222: Replacement Tyres

    MAINTENANCE IMPORTANT A tyre MUST be replaced as soon as a wear indicator becomes visible. Replacement Tyres DO NOT replace the wheels with wheels of any other type. Alternative wheels, of a different specification, may adversely affect the car's driving characteristics. Always have replacement wheels and tyres balanced before use.
  • Page 223 • Avoid tyre damage and excessive chain wear by removing snow chains when driving on snow free roads. Note: If you drive on the snowy and icy roads, it is recommended to use winter tyres. Consult an MG Authorised Repairer for details.

  • Page 224: Cleaning And Vehicle Care

    MAINTENANCE Cleaning and Vehicle Care If the car is particularly dirty, use a hose to flush grime and grit from the bodywork, prior to washing. Then, wash the Observe all safety precautions on cleaning car using cold or lukewarm water containing a good quality products;...
  • Page 225 Wash in warm soapy water. DO NOT use spirit or petrol recommendations. Failure to do this will invalidate the based cleaners. Anti-Corrosion Warranty. If in doubt, ask your MG Authorised Repairer. Windows and Mirrors Polishing the Paintwork Regularly clean all windows, inside and out, using an approved glass cleaner.

  • Page 226: Vehicle Graphics Care

    MAINTENANCE Vehicle Graphics Care Note: DO NOT scrape or use abrasive cleaners on the inside of the rear screen – this will damage the heating Wash Regularly elements. Wash whenever the vehicle appears dirty. Contaminants Mirrors: Wash with soapy water. Use a plastic scraper to allowed to remain on the vehicle graphics may be more remove ice.

  • Page 227: Cleaning The Interior

    MAINTENANCE Pressure Washing Cleaning the Interior The use of a pressure washer is not recommended as this Plastic Materials may damage the vehicle graphic. Clean plastic-faced materials with diluted upholstery cleaner, then wipe with a damp cloth. Difficult Contaminants Note: DO NOT polish dashboard components – these Soften difficult contaminants such as bug splatter, bird should remain non-reflective.
  • Page 228 MAINTENANCE Instrument Pack, Clock, Audio System and Extend the belts, then use warm water and a non-detergent soap to clean. Allow the belts to dry naturally; DO NOT Navigation Display retract them or use the car unitl they are completely dry. Clean with a dry cloth only.

  • Page 230: Technical Data

    Technical Data 214 Technical Data Dimensions 215 Weights 216 Major Parameters of Engine 217 Recommended Fluids and Capacities 218 Wheel Alignment (Unladen Condition) 218 Wheels and Tyres 218 Tyre Pressures (Cold)

  • Page 231: Technical Data Dimensions

    TECHNICAL DATA Technical Data Dimensions Parameter Parameter Item, units Item, units 1505 Overall length A, mm 4018 Front wheel track, mm 1513 (7J×16) Overall width B, mm 1728 1493 (including exterior-view mirror) (1887) Rear wheel track, mm 1501 (7J×16) Overall height C (unladen), mm 1507 Minimum turning circle diameter, 10.4...

  • Page 232: Weights

    TECHNICAL DATA Weights Item, units Parameter Person in cab, person Unladen vehicle weight (kerb), kg 1126 to 1165 Gross vehicle weight, kg 1665 to 1685 Extra Gross train weight, kg 1865 to 1885 Note: Please refer to the vehicle identification label for the exact GTW (gross train weight) for your vehicle. Towing Weights Item, units Parameter...

  • Page 233: Major Parameters Of Engine

    TECHNICAL DATA Major Parameters of Engine Item, units Parameter Bore × Stroke, mm × mm 75 × 84.8 Capacity, l 1.498 Compression ratio 10.5:1 Maximum power, kw Engine speed to develop maximum power, rev/min 6000 Maximum torque, Nm Engine speed to develop maximum torque, rev/min 4700 No load idle speed, rev/min 670±50...

  • Page 234: Recommended Fluids And Capacities

    TECHNICAL DATA Recommended Fluids and Capacities Name Fluid type Capacity Engine oil, l A1/B1 5W-20 Engine coolant, l Glycol (OAT) 4.9 (0.7 for expansion tank) Manual transmission fluid, l MTF 94 Brake fluid, l DOT 4 (Low Viscosity) 0.73 Power steering fluid, l Dexron III 0.92 Washer fluid, l...

  • Page 235: Wheel Alignment (Unladen Condition)

    TECHNICAL DATA Wheel Alignment (Unladen Condition) Tyre Pressures (Cold) Item Parameter Tyre Unladen Front Wheel 210kPa/2.1bar/31psi Camber angle -0°36'±45' Rear Wheel 210kPa/2.1bar/31psi Kingpin caster angle 3°33'±45' Front Toe in (one side) 0°8'±15' Kingpin inclination 12°22'±45' (non adjustable) Camber angle -1°16'±45' Rear Toe in (Total) 0°29'±20'...
  • Page 238 INDEX ABS (Anti Lock Braking System) 136 Band Button - Audio Controls 65, 78 ABS Warning Light 22,137 Battery - Handset 113 Accessory Power Socket 45 Battery Charging 21, 194 Aerial (Antenna) 69, 86 Battery Disconnection And Removal 193- 195 Air Conditioning (Climate Control) 50 Battery Maintenance 193- 195 A/C Air Distribution 50, 51...
  • Page 239 INDEX CD Playing 67 Changing a Wheel and Tyre 165 - 167 Ejecting A CD 67, 82 Child Proof Locks 115 Ejecting USB Device Safely 68, 83 Child Restraints and Seats 103 - 110 EBA (Electronic Brake Assist) 135 Cleaning - Car Interior 210 - 211 EBD (Electronic Brake Force Distribution) 135 Cleaning - Paintwork 207 - 209 Emission Control 179...
  • Page 240 INDEX Fuel Filling 131 Headlight Levelling 30, 31 Fuel Gauge 8 Heated Mirrors 37 Fuel Specification 216 Heated Rear Screen 53, 57 Fuel System 130 Heavy Loads 151 Fuses, Replacement And Colour 168 Hill Hold Function 135 Fuse Specifications 170- 172 Horn 36 Fuse Box (Passenger Compartment) 169- 171 Fuse Boxes (Engine Compartment) 172- 173...
  • Page 241 INDEX Mirrors - Door 37- 38 Mirrors - Interior 39 Jacking and Jack Positioning 165 - 167 Mirrors Cleaning 208- 209 Jump Leads 155- 156 Mirrors - Folding 39 Jump Starting 155- 156 Mislock 117 Key 112 Next Service 14, 18 Number Plate Lamps 174, 176 Lighting Switch 26 Load Carrying 151- 152...
  • Page 242 INDEX Steering Column Adjustment 35 Steering Lock 121- 122 Rain Sensor* 32 Sun Visor 41 Rear Fog Guard Lights 21 Rear Light Bulbs 174 Rear Seats - Folding 91 Rear Wiper Operation 33 TA - Traffic Announcement Button – Audio Controls, 66, 79 Rear Wiper Blade Replacement 200 Tachometer 8 Rear Window Isolation Switch 42...
  • Page 243 INDEX Wheel Alignment 218 Windows 42 - 43 Unlocking 112, 116, 117, 119 Window Lift Switch 42 USB Socket 68, 82 Windscreen Wipers 199 Used Engine Oil 181 Wiper Blade Replacement 200- 201 Wiper Controls 32- 34 Vanity Mirrors 41 Variable Delay - Wipers 32 Vehicle Identification Number 3, 4 Vehicle Information Display 10, 11, 15...
  • Page 244 MG MOTOR UK Lowhill Lane, Longbridge, Birmingham B31 2BQ www.mg.co.uk Version 2 2015...

Table of Contents