Service Procedures; Switch - Cruise Control - MG MG6 Series 2011 Service Manual

Interior Fitting

Service Procedures

Switch - Cruise Control

Remove
1. Disconnect battery earth lead.
2. Remove driver's airbag.
3. Disconnect steering wheel multiplugs.
4. Centralise steering wheel in straight ahead position.
5. Restrain steering wheel and loosen bolt securing
steering wheel to column - But do not fully remove
the bolt.
6. Mark fitted position of steering wheel to column.
7. Release steering wheel from column.
8. Remove bolt from steering wheel and remove steering
wheel.
9. Attach tape across edge of rotary coupler to retain
correct setting.
10. Remove screw securing RH tiptronic paddle switch
to steering wheel (if fitted) and carefully release clips
securing switch cover to steering wheel.
Version 2.0
Instrument Panel and Console
11. Remove screw securing cruise control switch assembly
to steering wheel.
12. Disconnect switch ribbon cable multiplug and remove
switch assembly.
Refit
1. Fit the switch assembly and connect switch ribbon
cable multiplug.
2. Fit the bolt securing cruise control switch assembly to
steering wheel.
3. Fit the tiptonic piddle switch to steering wheel and
secure the bolt.
4. Position the steering wheel and Secure the bolt
5. Press the steering wheel, and fit steering wheel to
restrain column with bolt.
6. Connect steering wheel multiplug.
7. Connect battery earth lead.
654