Table of Contents
Advertisement
Driveline/Axle
Drive Axle
Description
Drive shaft comprises a solid shaft with inner and outer
constant velocity joints. The intermediate shaft is fitted with
a roller bearing and bearing housing which is secured to the
rear of the cylinder block on the RH side. The other solid
shaft with inner and outer constant velocity joints is fitted to
the differential on the LH side. The inner joint is of the tripod
type with spherical bushing to reduce sliding resistance. The
shaft and joint are one assembly. The outer joint of the ball
and socket type is splined to the shaft and secured with a
snap ring. The joints are packed with grease and protected by
gaiters. Both drive shafts are fitted with dynamic dampers.
Version 2.0
644
Advertisement
Table of Contents
