Bulb - Rear Di; Bulb - Dip Beam - MG MG6 Series 2011 Service Manual

Lighting Systems

Bulb - Rear DI

Remove
1. Release boot lid latch.
2. Remove boot seal.
3. Remove luggage compartment sill trim casing.
4. Release luggage compartment trim.
5. Twist indicator lamp bulb holder anticlockwise and
release from lamp unit.
6. Remove indicator lamp bulb from holder and discard.
Refit
1. Fit new indicator lamp bulb into holder and refit holder
into lamp assembly.
2. Secure luggage compartment trim.
3. Fit luggage compartment sill trim casing.
4. Fit boot seal.
5. Close boot lid.
Version 2.0

Bulb - Dip Beam

Remove
1. Disconnect battery earth lead.
2. Remove engine compartment fuse box - LH headlamp
bulb only
Engine Engine Engine compartment compartment fuse compartment
3. Remove dust cover from headlamp.
4. Disconnect multiplug from bulb.
5. Release clip securing bulb to headlamp and remove bulb.
Refit
1. Fit bulb to headlamp and secure with clip.
2. Connect multiplug to bulb.
3. Fit dust cover to headlamp.
4. Fit engine compartment fuse box-LH headlamp bulb
only.
Engine compartment compartment fuse
Engine Engine compartment
5. Connect battery earth lead.
Lamps
fuse box-Remove fuse box-Remove box-Remove
fuse box-Refit box-Refit
fuse box-Refit
758