Wipers And Washers; Front Windscreen Wiper Controls - MG GT Manual

Wipers and Washers

Front Windscreen Wiper Controls

The wipers and washers will only operate when the ignition
switch is in position "ON". Operate the lever to select
different wiping speeds:
• Automatic wipe (1)
• Slow speed wipe (2)
• Fast speed wipe (3)
Instruments and Controls
• Single wipe (4)
• Automatic wipe interval adjustment (5)
• Programmed wipe (6)
Automatic Wipe
By pushing the lever up to the automatic wipe position
(1), the wipers will operate automatically. The interval
between the automatic wipes can be increased/decreased
via the switch (5). This interval will also change with the
vehicle speed. As the vehicle speed increases, the wiping
interval decreases. As the vehicle speed decreases, the
wiping interval increases.
Slow Speed Wipe
By pushing the lever up to the slow speed wiping position
(2), the wipers will operate slowly.
Fast Speed Wipe
By pushing the lever up to the fast speed wiping position
(3), the wipers will operate at fast speed.
1
41